[TRNSYS-users] Help with compiling new type on trnsys 16

[Richard Hall]

Kordou,



Hope this helps,



Once you have compiled your DLLs and it is in the ReleaseDLLs file, you then need to go into TRNSYS Studio and make a "New Component (TRNSYS Type)" proforma, fill in all the details, save it in the Studio\Proformas directory (in a new or existing folder) and then refresh your Studio library.



As I understand it, TRNSYS does not automatically real the DLLs, you need, through the proforma, to tell TRNSYS where your DLL is and what is in it.



Rich



________________________________
This transmission is confidential and must not be used or disclosed by anyone other than the intended recipient. The Steel Construction Institute cannot accept any responsibility for any use or misuse of the transmission by anyone.

The Steel Construction Institute is a company limited by guarantee registered in England and Wales under registered number 1916698 and whose registered office is at Silwood Park, Ascot, Berks, SL5 7QN, England. If you have received this message in error, you should not disclose its contents to anyone; please delete it and notify the sender immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110913/c5ace33e/attachment-0001.htm>