[TRNSYS-users] Error in Macro

mohammad abdunnabi moh_jum at yahoo.com
Sun Oct 30 02:30:42 PDT 2011


Dear Trnsys Users
 
I've faced problem when I used macro. The macro is consists of 30 evacuated tube collector with flow diverters and mixers. I've used three maco in my system to be simulated with the other components such as sotrage tanks auxilary heaters etc. When I run the program the following error appears:
Range check error
 
Bear in mind that each micro works fine (when I delete the other macros). Can any body help
 
Many thanks in advace

Dr. Mohammad Abdunnabi
Head of Thermal Energy conversion Department
Center for Solar Energy Research and Studies (CSERS)
Tripoli-Libya
P.O.Box: 12932
Tel.: +218 21 3699323
Fax.: +218 21 3699322
Office Phone: +218 21 7201993
Mobile Phone: +218 92 2256067
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111030/460b2f71/attachment-0005.htm>


More information about the TRNSYS-users mailing list