[TRNSYS-users] radiator_modelling

[Matt Duffy]

Dear Nomikos,First of all, if you have an older version of the TESS Libraries, it is not very expensive to upgrade. I would recommend doing that and obtaining the Type1231 radiator. If I did not have that option, I do not think I would pursue active layers. Rather, I would probably just using a pipe and specify the the loss coefficient, then couple that with Type56 via a GAIN input. The validity is questionable, but it might get you close.Regards,Matt Duffy   ----- Original Message -----From: "NOM KARAS" >;nomkaras at gmail.com 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111027/4037004e/attachment-0005.htm>