[TRNSYS-users] weather files

[Richard Hall]

There are a few ways to do it, I just use the Type 9 data reader and just copy the data from Excel into a text file. But this requires that you do the solar radiation conversion from horizontal to your surface outside TRNSYS (I have a custom Excel FORTRAN function and the advantage I find is that it make the simulation time independent).

Or you can use the Type 99 and there are examples of how to do that in:

\Trnsys17\Examples\Weather Data

Rich



________________________________
From: trnsys-users-bounces at cae.wisc.edu [trnsys-users-bounces at cae.wisc.edu] On Behalf Of Rana Mohsen [r.mohsen at live.com]
Sent: 27 October 2011 12:22
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] weather files

Dear All, i am a new user in Trnsys 17. i must do a simulation, and validate some data for buildings. and i need to create a weather file. so how can i do it. i have my own Data, radiation, ambient temperature, and relative humidity. do i must have a "meteonorm" program to create a weather data or there is any other solution.

Best Regards,
   Architect| Rana Hanafy

 Tübingerstraße 93,
  70178 Stuttgart,
  Germany
  0049-176-59730029


________________________________
This transmission is confidential and must not be used or disclosed by anyone other than the intended recipient. The Steel Construction Institute cannot accept any responsibility for any use or misuse of the transmission by anyone.

The Steel Construction Institute is a company limited by guarantee registered in England and Wales under registered number 1916698 and whose registered office is at Silwood Park, Ascot, Berks, SL5 7QN, England. If you have received this message in error, you should not disclose its contents to anyone; please delete it and notify the sender immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111027/a17e185a/attachment-0005.htm>