[TRNSYS-users] regarding the problem of using type 194 without inverter

[Guang Yu Jin]

Dear TRNSYS users,

I encounter some problem when using type 194 (PV model). I configure the parameter of
Vmaxp = 42
I maxp = 5.16

So the max power at the reference condition (25C, 1000W/m^2) is 42*5.16 =216 W
But the output of the type 194, for 1 pc of PV module, the  "Power at Mzximum Power Point" goes to 1000W+. That is impossible
Is any users can teach me where the problem is?

Thanks & Best Regards,
GY
----------------------------------------------------------
Jin Guang Yu
Network Team
DID: +65-6550 5386
email: GuangYu.Jin at sg.panasonic.com<mailto:GuangYu.Jin at sg.panasonic.com>
----------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111014/4ec2cda5/attachment-0005.htm>