[TRNSYS-users] Absorption chiller

[David BRADLEY]

Mayank,
  Without seeing your project, it is very difficult to tell what might 
be going wrong. Some possible causes are a controls problem (pumps and 
chillers not turning off when they should) or a thermal capacitance 
problem. I would recommend that you send your *.tpf (and any other files 
needed to run the system) to your distributor for assistance.
Kind regards,
  David


On 11/23/2011 23:02, Mayank Bhatnagar wrote:
>
> Dear all,
>
> I used absorption chiller of 30 kW with solar flat plate collector 80 
> m^2  area using weather file of Delhi. When I simulate it the hot 
> water tank temperature reaches negative value upto 100 ^0 C and 
> chilled water tank reach about 100^0 C. the chiller is working 
> properly for 8 kW load only. What is the cause of this problem.
>
> Thank you.
>
> *Mayank Bhatnagar*
>
> *M.Tech. (Energy Engineering)*
>
> *Malaviya National Institute of Technology,*
>
> *Jaipur (INDIA)*
>
> *contact no.- +91-9983816468*
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111129/44223e12/attachment-0005.htm>