[TRNSYS-users] By-pass in TRNSYS

[C. Ionescu]

Hello everybody!
 
I’m relatively new in TRNSYS and I want to simulate a ground-to-air heat
exchanger. My question is: how can I simulate the by-pass for this type of
exchanger? My exchanger is used to heat/cool the ventilation air during
winter/summer, but in the inter-season is no need to use it. So, it must be
by-passed. Thank you for your attention!
 
C.Ionescu
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111123/d0ffc565/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1458 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111123/d0ffc565/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 61041 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111123/d0ffc565/attachment-0001.gif>