[TRNSYS-users] Adjacent surfaces with TrnSys 3D

[olivier.davidau at amoes.com]

Hi,

 

When drawing a model in SketchUp, two surfaces should have exactly the same
vertices to be recognized as adjacent with the “matching surfaces” tool.
However it’s quite difficult to obtain perfect adjacency when drawing on
SketchUp.

I found that it can be fixed in TrnBuild within using the manual geometry
mode and matching adjacent surfaces.

But then it’s not possible to modify the model with SketchUp again, since
the geometry mode has been changed to “manual”.

Is there a method or tricks to avoid this problem?

 

Thanks in advance,

 

Olivier DAVIDAU

AMOES

Tél : 01 41 32 22 11

fax : 01 40 86 29 16

31 rue bapst

92600 Asnières sur seine

 <mailto:damien.lambert at amoes.com> olivier.davidau at amoes.com

 <http://www.amoes.com/> www.amoes.com

 <http://blog.amoes.com/> http://blog.amoes.com/

 <http://www.energiepositive.info/> www.energiepositive.info

 

AVIS: ce message est confidentiel, protégé par le secret professionnel et à
l'usage exclusif du destinataire. Si vous avez reçu ce message par erreur,
veuillez nous en informer immédiatement et détruire la copie.

NOTICE: this e-mail is confidential, privileged and intended for the
exclusive use of the addressee. If you have received this e-mail by mistake,
please notify us immediately and delete the copy.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111122/b944572a/attachment-0001.htm>