[TRNSYS-users] TRNbuild

[David BRADLEY]

Mayank,
   If you are creating your *.b17 from Trnsys3d and importing it into 
TRNBuild, you need to look at the entity properties for each surface in 
Trnsys3d and figure out which wall has not been fully defined as 
EXT_WALL, EXT_ROOF, ADJ_WALL etc.

   If you are creating your *.b17 (or *.bui) file by hand directly in 
TRNBuild, switch to the zone window and look through the list of walls 
until you see the one that has an "undefined" in the wall type field. 
Then select the wall and choose a wall construction from the pull down 
menu to the right.

Best,
  David


On 11/16/2011 00:47, Mayank Bhatnagar wrote:
>
> Hello everyone,
>
> In making a building in Trnbuild a error is occur:
>
> Zone->HALL1 airnode->HALL1: undefined wall type
>
> Please help me.
>
> Regards,
>
> *Mayank Bhatnagar*
>
> *M.Tech. (Energy Engineering)*
>
> *Malaviya National Institute of Technology,*
>
> *Jaipur (INDIA)*
>
> *contact no.- +91-9983816468*
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20111116/fe1bb409/attachment-0001.htm>