[TRNSYS-users] data input into trnsys

David BRADLEY d.bradley at tess-inc.com
Mon May 9 10:59:44 PDT 2011


Fanying,
  The way that I have accomplished this is to put the eQuest results 
into an Excel spreadsheet, then save the file as "tab delimited text." 
(comma separated will work too). I then read the file into TRNSYS using 
Type9. The cooling loads that are read in then get imposed on the 
district loop using Type682 from the TESS Loads and Structures library. 
Be careful about sign conventions - after reading the cooling loads in 
with Type9, you might need to change the sign so that when they are 
imposed on a flow stream they add energy to the district loop.
Kind regards,
  David

On 5/9/2011 03:50, mrsfanying wrote:
> Dear:
>  i use equest software to compute the hourly cooling load of a 
> community which includes some buildings , now i need to input the 
> hourly cooling load into trnsys in order to simulate a district 
> cooling system, how to do ?  thanks!
> B.R.
> fanying
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110509/407ef091/attachment-0005.htm>


More information about the TRNSYS-users mailing list