[TRNSYS-users] TRNSYS-users Digest, Vol 76, Issue 32

WALID KADRI walidenergetique at gmail.com
Sat May 7 15:03:16 PDT 2011


Thank you, thank you very much.
I'm preparing my memoiry of master i'm special in mechanic engeneering of
thermal power, my memoiry is about ISCC integrated solai combine cycle
systeme, if you have in exemple projet in transys about this send it please
to study it

2011/4/11 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. Re: Compyling with Microsoft Visual Studio 2010 onWindows 7
>      (Matt Duffy)
>   2. Re: Water-to-Water Thermofrigopump - Type 668 (Matt Duffy)
>   3. Re: get problem with the five stages thermostat (Jay Zhu)
>
>
> ---------- Message transféré ----------
> From: "Matt Duffy" <duffy at tess-inc.com>
> To: "Philip Horn" <phorn at fraunhofer.org>, trnsys-users at cae.wisc.edu
> Date: Sun, 10 Apr 2011 21:24:32 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Compyling with Microsoft Visual Studio 2010
> onWindows 7
>
> Hi Philip,
>
> We included pre-existing fortran solutions (IVF) or workspaces (IVF) that
> are ready for the user to either add their own component or recompile a
> DLL. You should be able to simply open the *.sln (if you have IVF) or the
> *.dsw (CVF) in the “.\Compilers\...” directory. Those pre-existing
> settings are for your TRNSYS directories do not have much relevance in
> your case.
>
> Best regards,
>
> Matt Duffy
>
>
>
> ----- Original Message -----
> From: "Philip Horn" <phorn at fraunhofer.org>
> Sent: Wed, April 6, 2011 14:41
> Subject:[TRNSYS-users] Compyling with Microsoft Visual Studio 2010
> onWindows 7
>
>
> Dear All,
>
> has anyone compiled a TRNSYS Type with Microsoft Visual Studio 2010 on
> Windows 7 and
> Intel Visual Fortran 2010 (using TRNSYS17)?
> I face many problems with trying so (modifying Type 551 in special)...
>
> One question is, what .exe file do I have to specify in the  TRNSYS
> Settings-
> Directories for "Fortran Environment"?
> Standard  setting should be :C:\Program Files\Microsoft Visual
> Studio\Common\MSDEV98\BIN\dfdev.exe I guess...
> But for MS VS 2010 I can not find the dfdev.exe file.
> The C++ environment path should change as well then I guess, right?
>
> and what about the compiler command "msdev.exe" ? What should I use here?
>
> Up to what I've read till now it makes sense to use a windows XP machine
> and Compaqu
> Visual fortran 6.6B.
> Then the compiling should be pretty straight forward.
> Can someone confirm that, or give any advice?
>
> I am currently reading into "language W" and "W editor" from CSTB as well
> to check
> wether this would do the job.
>
> Would be great to get some input from the experience users out there!!
>
> Thanks a lot in advance!!!
>
> Best,
> Philip
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
>
> ----- End of original message -----
>
>
>
>
> ---------- Message transféré ----------
> From: "Matt Duffy" <duffy at tess-inc.com>
> To: "Augustin CUQ" <augustin.cuq at gmail.com>
> Date: Sun, 10 Apr 2011 21:33:30 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Water-to-Water Thermofrigopump - Type 668
>
> Dear Augustin,
>
> The only difference is that the data file is normalized, so you can scale
> the rated capacity, flow rate, and power of the device without having to
> create different data files each time. Yes, both components have heating and
> cooling.
>
> I can send you a PDF of the parameters/inputs/outputs when I get back to
> the office on Monday if that would help.
>
>
>
> Best regards,
>
>
>
> Matt Duffy
>
>
> *----- Original Message -----*
> *From:* "Augustin CUQ" <augustin.cuq at gmail.com>
> *Sent:* Thu, April 7, 2011 3:17
> *Subject:* Re: [TRNSYS-users] Water-to-Water Thermofrigopump - Type 668
>
> Thank you for answering.
> I have read the summarised description of the components (in TESS Lib.),
> but to me, apart from the two stages, it seems to be similar to Type 668. Is
> that easier to produce those normalized data files for the user than with
> Type 668. Does the two-stage component accept both Heating and Cooling
> control signal?
> Is it possible to find the detailed description of these components, with
> their inputs and outputs, to know if they match with the use I am expecting?
>
> Kind regards,
> Augustin CUQ
>
> 2011/4/6 Mat t Duffy <duffy at tess-inc.com>
>
>> Dear Augustin,
>>
>> Yes, there is a better component. Type668 evolved into Type927 (single
>> stage) and Type1221 (two stage). These components have normalized data
>> files, so you can scale the capacity/power accordingly. These components are
>> in the TESS Libraries 17.
>>
>> Best regards,
>>
>> Matt Duffy
>>
>>
>>
>> *----- Original Message -----*
>> *From:* "Augustin CUQ" <augustin.cuq at gmail.com>
>> *Sent:* Tue, April 5, 2011 4:19
>> *Subject:* [TRNSYS-users] Water-to-Water Thermofrigopump - Type 668
>>
>>
>> Hi everyone,
>>
>> I am trying to model a "thermofrigopump", to obtain both cooling and
>> heating gains through a device.
>> After calculating the most important demand between heating and cooling
>> demands, the idea is to generate heat if heating demands is higher (or to
>> cool the fluid in the other case) and to use either the annex cold
>> production or the annex heat production for others uses. So that I need a
>> heat pump system which calculates both heat and cool power.
>> I was thinking to use Type 668 to model that. Is their a better Type to do
>> that and is that relevant?
>>
>> Thank's in advance for helping me, and sorry for the english mistakes..
>>
>> --
>> Augustin CUQ
>> ------------------------------
>>
>> _______________________________________________
>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>
>
> --
> Augustin CUQ
> Elève-Ingénieur en dernière année à l'Ecole des Mines de Nantes,
> Spécialisation en Génie des Systèmes Energétiques
>
> *Tel: 06 72 79 77 98*
>
>
>
> ---------- Message transféré ----------
> From: Jay Zhu <zhujiang1124 at gmail.com>
> To: Matt Duffy <duffy at tess-inc.com>
> Date: Sun, 10 Apr 2011 23:53:55 -0500
> Subject: Re: [TRNSYS-users] get problem with the five stages thermostat
> Dear Mr Matt Duffy:
> Followed your suggestions, i upgrade my TRNSYS to the newest model
> 17.00.0019. but i still have the same problem.
> and i found a new problem, after i modified the wall materials and roof
> materials and rerun it, the software give a very weird graph.for example ,
> room temperature is extremely low which doesn't make sense.
> would you please help me take a look at my system ? i will attach the TPF
> files and B17 files.
> Thank you in advance,  i am confused for this curious one a long time and
> really hope i will get the answers as soon as possible.
>
> On Tue, Apr 5, 2011 at 11:08 AM, Matt Duffy <duffy at tess-inc.com> wrote:
>
>> It should still work, but I am not 100% sure. I still strongly suggest you
>> upgrade to v 17.00.0019.
>>
>> Best regards
>>
>> Matt Duffy
>> Thermal Energy Systems Specialists
>>
>>
>> Sent from my mobile wireless device. Please excuse any typos.
>>
>> On Apr 5, 2011, at 10:45 AM, Jay Zhu <zhujiang1124 at gmail.com> wrote:
>>
>> Dear Mr Duffy:
>> I am using the version 17.00.0016,  Is this the latest version ? If not,
>> can i update it from the website or from the distributor?
>>
>> Thank you for you reply.
>>
>> Jiang
>>
>> On Tue, Apr 5, 2011 at 6:45 AM, Matt Duffy < <duffy at tess-inc.com>
>> duffy at tess-inc.com> wrote:
>>
>>> Dear Jiang Zhu,
>>>
>>> Please make sure that you are using the latest version of Trnsys17. There
>>> was a known bug with Type108 in version 16.
>>>
>>> Best regards,
>>>
>>> Matt Duffy
>>> Thermal Energy Systems Specialists
>>>
>>>
>>> Sent from my mobile wireless device. Please excuse any typos.
>>>
>>> On Apr 4, 2011, at 7:59 AM, Jay Zhu < <zhujiang1124 at gmail.com>
>>> zhujiang1124 at gmail.com> wrote:
>>>
>>> > you !
>>> >
>>> >
>>> > Jiang Zhu
>>>
>>
>>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110508/cc72ae55/attachment-0001.htm>


More information about the TRNSYS-users mailing list