[TRNSYS-users] (no subject)

[David BRADLEY]

Hamza,
  That warning is usually not a problem. Each input and each output of a 
Type normally has a three letter code associated with it to indicate to 
the TRNSYS kernel what the units are. For example, if an output is a 
temperature in degrees C then the output has a code of "TE1." If the 
output is power in kJ/h then it has a code of "PW1." The TRNSYS kernel 
checks to make sure that all of your input/output connections have 
matching units (PW1 connected to PW1, etc.) and it warns you if there is 
a mismatch. Some non-standard Types don't have those codes set right and 
some of them just use a default of "DM1" (dimensionless) for all inputs 
and outputs. If you look at the actual list file (instead of the 
Studio's log file display) you'll see where the units mismatch is 
reported. If you can't find it, send the *.lst file to me and I'll see 
if I can point it out
best,
  David


On 4/30/2011 18:11, hamza aouissi wrote:
> hi everybody,
> i have this warning :Type 422      TRNSYS MESSAGE       33:An 
> inconsisstent connection has been defined in the TRNSYS input file.The 
> desired unots for the input do not match the units
> of the connected output as specified in the component model. The 
> dicrepency is listed below.
>
> Reported information: Not available
>
>
>
> that's it.Notice that i am using the STEC library, and i did'nt modify 
> the input file.
> If anyone can help me please.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110503/9bf97caf/attachment-0001.htm>