[TRNSYS-users] Problem with Trnsys 3d / SketchUp 7

[David BRADLEY]

Rebecca,
   When I first started using SketchUp, I used the value control box as 
follows: click to start a line, click to end the line, enter the 
dimension in the value control box before clicking anywhere else. It 
worked fine BUT I don't think it was intended to. I think the correct 
procedure (and the one that works in TRNSYS3D) is as follows: click to 
start a line, move the mouse to get the line pointing in the proper 
direction (BUT DON"T CLICK!!!) then enter the dimension in the value 
control box and press enter.
best,
  david


On 5/3/2011 08:03, Matt Duffy wrote:
>
> Dear Rebecca,
>
> I am not familiar with  your particular issue as I have never had a 
> problem specifying lengths/distances of lines and push/pulls with the 
> value control box with TRNSYS3D. However, you may have a different 
> drawing setting (Window -> Preferences -> Drawing).
>
> Best regards,
>
> Matt Duffy
>
> *----- Original Message -----*
> *From:* "Rebecca Ward" <rebecca at familyward.com>
> *Sent:* Tue, May 3, 2011 6:52
> *Subject:* [TRNSYS-users] Problem with Trnsys 3d / SketchUp 7
>
> Hi,
> I'm having a problem using Trnsys 3D with SketchUp 7.  It seems as 
> though the Value Control Box won't work within a Trnsys Zone - I can 
> use other tools, but am having problems defining dimensions 
> accurately.  Has anyone else had this problem?  I am running under 
> Vista, don't know if that makes a difference?
> Thanks for your help,
> Rebecca
> ------------------------------------------------------------------------
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu  <javascript:bodyCreateMail('TRNSYS-users%40cae.wisc.edu')>
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110503/2cf9e590/attachment-0001.htm>