[TRNSYS-users] open the former *.skp file with TRNSYS3D

Thu Mar 31 05:33:30 PDT 2011

Dear Mr. Duffy,

    Thanks! But how to open the *.idf file? By what? Simulation Studio or
Sketchup etc.?

    Many thanks!

   Br.

wang

2011/3/31 Matt Duffy <duffy at tess-inc.com>

>
> Dear TRNSYS Users,
>
> There seems to be this question very often. Please remember to work in the
> TRNSYS3D plugin (Open, Save, Close the *.idf) and NOT open/close/save in
> SketchUp (*.skp). You do not even need to save any *.skp.
>
> Thank you,
>
> Matt Duffy
>
> *----- Original Message -----*
> *From:* "王洋" <wanghongyang1767 at gmail.com>
> *Sent:* Thu, March 31, 2011 3:02
> *Subject:* [TRNSYS-users] open the former *.skp file with TRNSYS3D
>
> Dear all,
>
>    How to open the former *.skp file correctly?
>
>   When I open it, it always shows as follows:
>
>
>
>
>
>
>
> Sorry...the plugin has encountered an error.  This error may cause
> unpredictable behavior in the plugin--continue this session with caution!
> It would probably be a good idea to exit SketchUp and start again.
>
> For help, please contact the TRNSYS newsgroup by
> https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users .
>
>  When reporting a bug, please include the error message and backtrace below
> (scroll down):
>
> ERROR:
> NameError
> wrong constant name lorScaleInterface
>
> BACKTRACE:
> C:/Programme/Google/Google SketchUp
> 7/Plugins/Trnsys3d/lib/DialogManager.rb:31:in `const_get'
> C:/Programme/Google/Google SketchUp
> 7/Plugins/Trnsys3d/lib/DialogManager.rb:31:in `restore_state'
> C:/Programme/Google/Google SketchUp
> 7/Plugins/Trnsys3d/lib/DialogManager.rb:31:in `initialize'
> C:/Programme/Google/Google SketchUp
> 7/Plugins/Trnsys3d/lib/AsynchProc.rb:13:in `call'
>
> Please give some suggustions!
>
> Many thanks!
>
> Br.
>
> wang
>
>
> 2011/3/30 <trnsys-users-request at cae.wisc.edu>
>
>> Send TRNSYS-users mailing list submissions to
>>        trnsys-users at cae.wisc.edu
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
>> or, via email, send a message with subject or body 'help' to
>>        trnsys-users-request at cae.wisc.edu
>>
>> You can reach the person managing the list at
>>        trnsys-users-owner at cae.wisc.edu
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of TRNSYS-users digest..."
>>
>> Today's Topics:
>>
>>   1. problem of IDF File from Sketchup8 in TRNBUILD (Pauline GELIN)
>>   2. Polymer PV-T absorber/ Type 560 (Philip Horn)
>>   3. trnsys3d pug-in sketchup8 : problem of adjacent wall for
>>      several others zones (Pauline GELIN)
>>   4. Re: Soil noding plugin for Googlesketchup. (Jeff Thornton)
>>
>>
>> ---------- 已转发邮件 ----------
>> From: Pauline GELIN <p.gelin at katene.fr>
>> To: "TRNSYS-users at cae.wisc.edu" <TRNSYS-users at cae.wisc.edu>
>> Date: Wed, 30 Mar 2011 15:21:13 +0200
>> Subject: [TRNSYS-users] problem of IDF File from Sketchup8 in TRNBUILD
>>
>> (SketchUp 8 (with some hours on Sketchup Pro eval), Operating
>> system:Windows Vista)
>>
>>
>>
>> From a 2D plan created in Nova, I had to create in 3D each zone/room
>> separated to, after, copy them in one different trnsys3d zone for each.
>>
>> After I had to identify each adjacent wall between all the rooms.
>>
>> Then, I saved a IDf File and wanted to import it in TRNBuild.
>>
>>
>>
>> There was this following message :
>>
>> "Zone: ARCH 1 Airnode: ARCH1 (it is the nam of one of my rooms)
>>
>> Wall must have an active layer or chilled ceiling layer or must be
>> adjacent to a different zone
>>
>> ADJ_WALL Surf 13
>>
>> "
>>
>>
>>
>> I don't understand what this means because this room includes 3 external
>> walls and only one adj_wall.
>>
>> And as on Sketchup we can't identify several adjacent rooms, I linked this
>> adj_wall with the room with the most common surface which is even not 13m².
>>
>>
>>
>> Is there anyone who can tell me what I can change to succeed my import ?
>>
>>
>>
>> Thank you so much for your help.
>>
>>
>>
>> Best Regards,
>>
>>
>>
>> Pauline Gelin
>>
>>
>> ---------- 已转发邮件 ----------
>> From: Philip Horn <phorn at fraunhofer.org>
>> To: "trnsys-users at engr.wisc.edu" <trnsys-users at engr.wisc.edu>
>> Date: Wed, 30 Mar 2011 09:49:56 -0400
>> Subject: [TRNSYS-users] Polymer PV-T absorber/ Type 560
>>
>> Dear All,
>>
>>
>>
>> I want to simulate an unglazed  polymer PV-T collector in TRNSYS.
>>
>> I was wondering if anyone has done this already, or could give some
>> advice?
>>
>>
>>
>> My plan is to take Type 560 and modify some parameters (heat conductivity,
>> heat transfer coefficients (want to model rectangular “tubes”).
>>
>> It must not be 100% accurate in the beginning, more like a first
>> estimation.
>>
>>
>>
>> Would be glad if someone could give some helpful input.
>>
>>
>>
>> Best Regards,
>>
>> Philip
>>
>>
>>
>>
>>
>> *Philip Horn*
>> *Fraunhofer Center for Sustainable Energy Systems CSE*
>> 25 First Street
>>
>> Cambridge, MA 02141, U.S.A.
>> +1 617-575 7250 x139
>> phorn at fraunhofer.org <astokes at fraunhofer.org>
>> http://cse.fraunhofer.org/
>>
>>
>> The contents of this email and any files or attachments transmitted with
>> it, unless otherwise indicated, are confidential and/or privileged.  The
>> recipient may not use this message and any attachment for other than its
>> intended purpose.
>>
>>
>>
>>
>> ---------- 已转发邮件 ----------
>> From: Pauline GELIN <p.gelin at katene.fr>
>> To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
>> Date: Wed, 30 Mar 2011 18:23:19 +0200
>> Subject: [TRNSYS-users] trnsys3d pug-in sketchup8 : problem of adjacent
>> wall for several others zones
>>
>>
>> SketchUp version:sketchup8
>> Operating system:windows xp
>>
>>
>> I am so sorry to ask a so easy question but I didn't find how to link a
>> wall to several others zones.
>> Indeed, in the object info we can only choose one zone.
>> But, if I cut my zone into 2 parts and, for example, erase the adjacent
>> wall to recreate it in trnbuild, after, there is no more interest to use
>> sketchup and it would be quicker to do everything in trnbuild.
>>
>> Is there anyone who already met this problem?
>> Do you have a solution ?
>>
>> Thanks a lot in advance for your help.
>>
>> Best regards,
>>
>> Pauline Gelin.
>>
>>
>>
>>
>> ---------- 已转发邮件 ----------
>> From: "Jeff Thornton" <thornton at tess-inc.com>
>> To: "Sébastien THOMAS" <sebastien.thomas at ulg.ac.be>,
>> trnsys-users at cae.wisc.edu
>> Date: Wed, 30 Mar 2011 11:48:25 -0500 (CDT)
>> Subject: Re: [TRNSYS-users] Soil noding plugin for Googlesketchup.
>> <I am attempting to run the « Soil Noding 2D » plugin for sketchup.
>> Unfortunately I did not reach to build any mesh in the text file.   In
>> fact, I have the following messages but no mesh at the end of the
>> procedure :      TESS Soil & Slab Noding program for TRNSYS 17.  How far
>> the building is the temperature of the soil assumed unaffected by the
>> building….     Has someone good knowledge of this plugin ?  >
>>
>> Did you answer the question posed by the plugin?  Put in something like 10
>> meters and hit enter.  Then continue to answer the questions until the
>> program informs you that the data file has been created.  We use it all
>> the time!
>>
>> Jeff
>>
>>
>> Jeff Thornton
>> President - TESS, LLC
>>
>> 22 North Carroll Street - Suite 370
>> Madison WI 53703 USA
>>
>> Phone: 608-274-2577
>> Fax: 608-278-1475
>> E-mail: thornton at tess-inc.com
>> Web: www.tess-inc.com
>>
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
> ------------------------------
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110331/3697bba6/attachment-0005.htm>