[TRNSYS-users] open the former *.skp file with TRNSYS3D

Thu Mar 31 01:02:40 PDT 2011

Dear all,

   How to open the former *.skp file correctly?

  When I open it, it always shows as follows:

Sorry...the plugin has encountered an error.  This error may cause
unpredictable behavior in the plugin--continue this session with caution!
It would probably be a good idea to exit SketchUp and start again.

For help, please contact the TRNSYS newsgroup by
https://www-old.cae.wisc.edu/mailman/listinfo/trnsys-users .

 When reporting a bug, please include the error message and backtrace below
(scroll down):

ERROR:
NameError
wrong constant name lorScaleInterface

BACKTRACE:
C:/Programme/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/DialogManager.rb:31:in `const_get'
C:/Programme/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/DialogManager.rb:31:in `restore_state'
C:/Programme/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/DialogManager.rb:31:in `initialize'
C:/Programme/Google/Google SketchUp
7/Plugins/Trnsys3d/lib/AsynchProc.rb:13:in `call'

Please give some suggustions!

Many thanks!

Br.

wang

2011/3/30 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. problem of IDF File from Sketchup8 in TRNBUILD (Pauline GELIN)
>   2. Polymer PV-T absorber/ Type 560 (Philip Horn)
>   3. trnsys3d pug-in sketchup8 : problem of adjacent wall for
>      several others zones (Pauline GELIN)
>   4. Re: Soil noding plugin for Googlesketchup. (Jeff Thornton)
>
>
> ---------- 已转发邮件 ----------
> From: Pauline GELIN <p.gelin at katene.fr>
> To: "TRNSYS-users at cae.wisc.edu" <TRNSYS-users at cae.wisc.edu>
> Date: Wed, 30 Mar 2011 15:21:13 +0200
> Subject: [TRNSYS-users] problem of IDF File from Sketchup8 in TRNBUILD
>
> (SketchUp 8 (with some hours on Sketchup Pro eval), Operating
> system:Windows Vista)
>
>
>
> From a 2D plan created in Nova, I had to create in 3D each zone/room
> separated to, after, copy them in one different trnsys3d zone for each.
>
> After I had to identify each adjacent wall between all the rooms.
>
> Then, I saved a IDf File and wanted to import it in TRNBuild.
>
>
>
> There was this following message :
>
> "Zone: ARCH 1 Airnode: ARCH1 (it is the nam of one of my rooms)
>
> Wall must have an active layer or chilled ceiling layer or must be adjacent
> to a different zone
>
> ADJ_WALL Surf 13
>
> "
>
>
>
> I don't understand what this means because this room includes 3 external
> walls and only one adj_wall.
>
> And as on Sketchup we can't identify several adjacent rooms, I linked this
> adj_wall with the room with the most common surface which is even not 13m².
>
>
>
> Is there anyone who can tell me what I can change to succeed my import ?
>
>
>
> Thank you so much for your help.
>
>
>
> Best Regards,
>
>
>
> Pauline Gelin
>
>
> ---------- 已转发邮件 ----------
> From: Philip Horn <phorn at fraunhofer.org>
> To: "trnsys-users at engr.wisc.edu" <trnsys-users at engr.wisc.edu>
> Date: Wed, 30 Mar 2011 09:49:56 -0400
> Subject: [TRNSYS-users] Polymer PV-T absorber/ Type 560
>
> Dear All,
>
>
>
> I want to simulate an unglazed  polymer PV-T collector in TRNSYS.
>
> I was wondering if anyone has done this already, or could give some advice?
>
>
>
> My plan is to take Type 560 and modify some parameters (heat conductivity,
> heat transfer coefficients (want to model rectangular “tubes”).
>
> It must not be 100% accurate in the beginning, more like a first
> estimation.
>
>
>
> Would be glad if someone could give some helpful input.
>
>
>
> Best Regards,
>
> Philip
>
>
>
>
>
> *Philip Horn*
> *Fraunhofer Center for Sustainable Energy Systems CSE*
> 25 First Street
>
> Cambridge, MA 02141, U.S.A.
> +1 617-575 7250 x139
> phorn at fraunhofer.org <astokes at fraunhofer.org>
> http://cse.fraunhofer.org/
>
>
> The contents of this email and any files or attachments transmitted with
> it, unless otherwise indicated, are confidential and/or privileged.  The
> recipient may not use this message and any attachment for other than its
> intended purpose.
>
>
>
>
> ---------- 已转发邮件 ----------
> From: Pauline GELIN <p.gelin at katene.fr>
> To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
> Date: Wed, 30 Mar 2011 18:23:19 +0200
> Subject: [TRNSYS-users] trnsys3d pug-in sketchup8 : problem of adjacent
> wall for several others zones
>
> SketchUp version:sketchup8
> Operating system:windows xp
>
>
> I am so sorry to ask a so easy question but I didn't find how to link a
> wall to several others zones.
> Indeed, in the object info we can only choose one zone.
> But, if I cut my zone into 2 parts and, for example, erase the adjacent
> wall to recreate it in trnbuild, after, there is no more interest to use
> sketchup and it would be quicker to do everything in trnbuild.
>
> Is there anyone who already met this problem?
> Do you have a solution ?
>
> Thanks a lot in advance for your help.
>
> Best regards,
>
> Pauline Gelin.
>
>
>
>
> ---------- 已转发邮件 ----------
> From: "Jeff Thornton" <thornton at tess-inc.com>
> To: "Sébastien THOMAS" <sebastien.thomas at ulg.ac.be>,
> trnsys-users at cae.wisc.edu
> Date: Wed, 30 Mar 2011 11:48:25 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Soil noding plugin for Googlesketchup.
> <I am attempting to run the « Soil Noding 2D » plugin for sketchup.
> Unfortunately I did not reach to build any mesh in the text file.   In
> fact, I have the following messages but no mesh at the end of the
> procedure :      TESS Soil & Slab Noding program for TRNSYS 17.  How far
> the building is the temperature of the soil assumed unaffected by the
> building….     Has someone good knowledge of this plugin ?  >
>
> Did you answer the question posed by the plugin?  Put in something like 10
> meters and hit enter.  Then continue to answer the questions until the
> program informs you that the data file has been created.  We use it all
> the time!
>
> Jeff
>
>
> Jeff Thornton
> President - TESS, LLC
>
> 22 North Carroll Street - Suite 370
> Madison WI 53703 USA
>
> Phone: 608-274-2577
> Fax: 608-278-1475
> E-mail: thornton at tess-inc.com
> Web: www.tess-inc.com
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110331/6bc7ae29/attachment-0005.htm>