[TRNSYS-users] Soil noding plugin for Googlesketchup.

[Sébastien THOMAS]

Dear Trnsys users,

 

I am attempting to run the « Soil Noding 2D » plugin for sketchup.
Unfortunately I did not reach to build any mesh in the text file. 

In fact, I have the following messages but no mesh at the end of the
procedure : 

 

TESS Soil & Slab Noding program for TRNSYS 17.

How far the building is the temperature of the soil assumed unaffected by
the building
.

 

Has someone good knowledge of this plugin ? 

 

I regularly use TRNSYS3d plugin so I do not think this comes from a wrong
use of sketch up ! 

 

Thank you

 

Sébastien Thomas

University of Liège
Arlon Campus Environnement
BEMS Team - Building Energy Monitoring and Simulation - 
185, Avenue de Longwy 
6700 ARLON 
BELGIUM



  Tel: 32-(0)63-230 982
  Fax: 32-(0)63 230 800
  email: sebastien.thomas at ulg.ac.be
  WEB: http://www.bems.ulg.ac.be 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110330/0665e460/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 13002 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110330/0665e460/attachment-0005.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 2650 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110330/0665e460/attachment-0003.jpg>