[TRNSYS-users] Questions...please reply

[Liu,Meng]

I am not sure whether you have built your model with Trnsys-3D. This kind of errors typically occur  during the *.idf file is exported from Sketchup (Trnsys-3D) and imported to Trnsys Studio 3D building project.
Probably the error is caused by:
1) You didn't set the adjacent walls to face with  each other
2) You didn't set any zones as activated state when modeling it.
Please find the attached file for your reference.
Good luck!

Meng Liu




From: Juvêncio Correia Tavares 
Sent: Friday, March 04, 2011 5:50 PM
To: TRNSYS simulação 
Subject: Re: [TRNSYS-users] Questions...please reply




I`m doing a dynamic simulation of buildings in TRNSYS, during the simulation gave the following error ... as you can see in the picture. 
how can I fix this error?

And also, I would like to send me a PDF about connection.

I await your response.

thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110307/2f9d357b/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tutorial.pdf
Type: application/pdf
Size: 892570 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110307/2f9d357b/attachment-0005.pdf>