[TRNSYS-users] type 647 problem

[muhammad waseem]

Hi All,
i want to simulate a system in which a want to get flow through one outlet
of type 647 when the temperature is say greater than 55 Degree and from
second outlet when it is less than that. I have modelled a simple system,
which is attached.

I am getting flow through outlet 1, when it should be from outlet 2.  your
help will be highly appreciated.

Thanks

Regards

-- 
MUHAMMAD WASEEM AHMAD
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110308/0b0b2db5/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project13.dck
Type: application/octet-stream
Size: 5598 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110308/0b0b2db5/attachment-0003.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project13.log
Type: application/octet-stream
Size: 9774 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110308/0b0b2db5/attachment-0004.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project13.tpf
Type: application/octet-stream
Size: 91704 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110308/0b0b2db5/attachment-0005.obj>