[TRNSYS-users] New error Internal error in solar radiation distribution

[Mehdi Shahrestani]

Dear Christian 

 

Many thanks for your reply. Based on your advice I have redraw the 3D and
import it into the model but still I have got the same error. In model I do
not have any small surface at all I double checked it.

 

All things that I separately did:

1.	Redraw the 3D and implementation and importing to the model (model
specification: Geometry 3D, all radiation modes: standard) this effort came
to the same error.
2.	In the next try, I reduced the geometry mode to manual but again it
came into the same error.
3.	In comfort windows I changed the mean radiant temperature from
detailed mode to simple mode but again it came into the same error.

 

These were all came in to my mind based on your advice but I was not
successful. 

 

I was wondering if you could do me a favour and give me some more advices.

As attached the *.tpf, *.b17 and *.idf files are attached. 

 

Regards 

Mehdi Shahrestani

 

 

 

  _____  

From: hotline [mailto:hotline at transsolar.com] 
Sent: 17 June 2011 08:26
To: mahdishahrestani; trnsys-users
Subject: AW: [TRNSYS-users] New error Internal error in solar radiation
distribution

 

Hi Mehdi, 

  

one reason for this can be that in your 3D Modell you have infinitesimal
small surfaces. 

Please check if this is the case and if so you'll have to redraw the
geometry. 

  

Regards 

Christian 

  

TRANSSOLAR Software Team 

hotline at transsolar.com 

  

www.trnsys.de <http://www.trnsys.de/>  

Transsolar KlimaEngineering - Technologien für energieeffizientes Bauen und
Nutzerkomfort in Gebäuden                                    

Transsolar Energietechnik GmbH, Curiestrasse 2, 70563 Stuttgart /
Amtsgericht Stuttgart - HRB 23347 / UsSt.-Id: DE152272639 

Geschäftsführer: Dipl.Ing. Matthias Schuler, Dipl.Ing. Thomas Auer,
Dipl.Phys. Stefan Holst, Prof. Volkmar Bleicher 

  

 

  _____  

   Von: Mehdi Shahrestani [mailto:mahdishahrestani at yahoo.com] 
Gesendet: Donnerstag, 16. Juni 2011 21:21
An: trnsys-users at cae.wisc.edu
Betreff: [TRNSYS-users] New error Internal error in solar radiation
distribution

Dear All 

 

I am facing a new error for type 56. I was wondering if anybody could help
to tackling the issue for version 17. 

 

Message: Internal error in solar radiation distribution (sumsitot) of
61.156 % at time   224.20wave length band no.2 1:total solar, 2:visual
solar, 3:non visual solar 

 

 

Many thanks 

Mehdi Shahrestani 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110617/51718c08/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bldg08.tpf
Type: application/octet-stream
Size: 180325 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110617/51718c08/attachment-0015.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bldg08.b17
Type: application/octet-stream
Size: 170192 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110617/51718c08/attachment-0016.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: bldg08.idf
Type: application/octet-stream
Size: 499760 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110617/51718c08/attachment-0017.obj>