[TRNSYS-users] type 16

[王洋]

Dear all,

        I added our institute own weather data into TRNSYS using Type 9. But
I also want to add the other weather data: Global Radiation into TRNSYS. As
I knew, I need Type 16 and Type 9. But I don't know detailed setting and
defination of Type 16. Please give me some advices in details.
        E.g. 1. Which Mode should I select? Mode 2? Because there are Global
radiation, Outdoor temperature and Humidity and wind speed, wind direction
and Air pressure in our weather station.
        2. In details which Inputs and Outputs of Type 16 need I link to
Type 9 and others?
        3. How to set and define the Parameter, Input and Output in details?

        Many thanks!

       Br.

     wang

2011/6/13 <trnsys-users-request at cae.wisc.edu>

> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. Question(solar radiation) (=?EUC-KR?B?udrB2L/4?=)
>   2. TRNSYS Active Layer Flowrate (Devin Rohan)
>   3. type 700 efficiencies (Pablo D?az N??ez)
>
>
> ---------- 已转发邮件 ----------
> From: 박준원<flowrime at naver.com>
> To: <trnsys-users at cae.wisc.edu>
> Date: Mon, 13 Jun 2011 20:33:02 +0900
> Subject: [TRNSYS-users] Question(solar radiation)
>
> Hi!!
>
> I am a Korean student, i'm having some trouble with solar radiation.
>
>
>
> I want to get "Indoor solar radiation" using Type56b(Multi zone)...
>
>
>
> But. I dont know output value about solar radiation..
>
>
>
> I think,  Ntype 73 (zone output) is zone solar radiation, is it right??
>
>
>
> However i dont know unit of that..
>
>
>
> So.. My question are..
>
>
>
> 1. is Ntype 73 zone solar radiation? so what's the unit??
>
>
>
> 2. if not Ntype 73, How can i get the indoor solar radiation?
>
>
>
>
>
> thanks to all,
>
>
> ---------- 已转发邮件 ----------
> From: Devin Rohan <dmrohan at gmail.com>
> To: trnsys-users at cae.wisc.edu
> Date: Sat, 11 Jun 2011 20:10:01 -0400
> Subject: [TRNSYS-users] TRNSYS Active Layer Flowrate
> The Type 56 manual suggests that the specific mass flow rate be greater
> than 13 kg/h-m^2.  Say I wanted to convert this to mass flow rate in kg/s
> and the fluid was flowing through a 3/8" (or 9.525 mm) inside diameter pipe.
>  Here's what I'm doing...
>
> A_pipe= (pi*D^2)/4 = (pi*.009525^2)/4= 7.1256 E-5 m^2
>
> 13 kg/h-m^2   x   (7.1256 E-5 m^2)   x   (h / 3600 sec)  =  2.573 E-7 kg/s
>
> This seems like an awfully low mass flow rate, since what I've seen in
> literature for floor heating applications is around .05 kg/s.  Am I missing
> something here?
>
> --
> Devin M. Rohan
> drohan at purdue.edu
>
>
> ---------- 已转发邮件 ----------
> From: "Pablo Díaz Núñez" <p.diazn87 at gmail.com>
> To: trnsys-users at cae.wisc.edu
> Date: Mon, 13 Jun 2011 18:16:34 +0200
> Subject: [TRNSYS-users] type 700 efficiencies
> Dear trnsys users,
>
> I am simulating and studying the behaviour of a central heating system of a
> residential building with gas boilers. For the boiler I'm using type 700,
> where combustion and boiler efficiencies are inputs. I need these values as
> a function of the intlet water temperature and the part load ratio for the
> model to work and I don't find this data in any boiler catalog. Only partial
> data like the boiler efficiency at rated power.
>
> If somebody had any cataloge with this data I would be very thankful. Or
> maybe somebody knows any manufacturer who could provide me.
>
> I know it's not a doubt or question about trnsys itself, but I'm a bit
> desperate.
>
> Thanks in advance!
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110614/1d3905db/attachment-0005.htm>