[TRNSYS-users] TYPE 56 Comfort Output Problem

[Mehdi Shahrestani]

Hi Devin

After selecting TOPLW and putting it in the left box (see following fig) you
have to double click on it. 

 



 

Then another windows comes up like this 

 



 

You have to select the right hand side item and put it on the left box.

 

Hope it helps

Mehdi

 

 

  _____  

From: trnsys-users-bounces at cae.wisc.edu
[mailto:trnsys-users-bounces at cae.wisc.edu] On Behalf Of Devin Rohan
Sent: 13 June 2011 00:19
To: trnsys-users at cae.wisc.edu
Subject: [TRNSYS-users] TYPE 56 Comfort Output Problem

 

When I try to select the TOPLW (Long-wave Operative Temperature) output in
the NTYPE left box of TRNBuild, nothing shows up in the
"NTYPE-COMFORT-DEFINITIONS" window.  What is going wrong and how can I
output the operative temperature?  Thanks

-- 
Devin M. Rohan, LEED Green Associate
Purdue University 
Civil/Architectural Engineering
drohan at purdue.edu

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110613/45c8424d/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 26529 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110613/45c8424d/attachment-0006.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 12253 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110613/45c8424d/attachment-0007.jpg>