[TRNSYS-users] Fatal Error in Automatic Heat Transfer Calculation

[Matt Duffy]

Dear Rebecca,The automatic heat transfer calculation can only be used for interior surfaces. For the exterior surfaces, you may use the recommended 64 kJ/hm2K, or we sometimes use a correlation in an equation block that is a function of the wind speed.Best regards,Matt Duffy   ----- Original Message -----From: "Rebecca Ward" >;rmw61 at cam.ac.uk 
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110616/d7767940/attachment-0001.htm>