[TRNSYS-users] Set 2 or more than 2 AIRNODES
王洋
wanghongyang1767 at gmail.com
Wed Jul 27 07:44:48 PDT 2011
Dear all,
As we know, the default airnode for one zone is one airnode. But I
want to set 2 or more than 2 airnodes in one zone. Please tell me the
detailed steps how to set 2 or more than 2 airnodes in one zone?
Furthermore, if I set more than 2 nodes, which advantages has
it better than only one node in one zone?
Many thanks in advance!
Br.
wang
2011/7/26 王洋 <wanghongyang1767 at gmail.com>
>
>
> 2011/7/25 王洋 <wanghongyang1767 at gmail.com>
>
>>
>>
>> 2011/7/22 <trnsys-users-request at cae.wisc.edu>
>>
>>> Send TRNSYS-users mailing list submissions to
>>> trnsys-users at cae.wisc.edu
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>> or, via email, send a message with subject or body 'help' to
>>> trnsys-users-request at cae.wisc.edu
>>>
>>> You can reach the person managing the list at
>>> trnsys-users-owner at cae.wisc.edu
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of TRNSYS-users digest..."
>>>
>>> Today's Topics:
>>>
>>> 1. Re: Superheated Steam Properties (Jeff Thornton)
>>> 2. Re: sloping surfaces (David BRADLEY)
>>> 3. Re: Number of Labels (David BRADLEY)
>>>
>>>
>>> ---------- 已转发邮件 ----------
>>> From: "Jeff Thornton" <thornton at tess-inc.com>
>>> To: farah.gammoh at industrial-solar.de, trnsys-users at cae.wisc.edu
>>> Date: Thu, 21 Jul 2011 12:26:44 -0500 (CDT)
>>> Subject: Re: [TRNSYS-users] Superheated Steam Properties
>>> Farah,
>>>
>>> The steam_props subroutine does subcooled, saturated and superheated
>>> steam. Check the documentation for the details. To get the enthalpy,
>>> simply provide two state properties to the subroutine (T and P, T and S,
>>> etc.)
>>>
>>> Jeff
>>>
>>>
>>>
>>> Jeff Thornton
>>> President - TESS, LLC
>>>
>>> 22 North Carroll Street - Suite 370
>>> Madison WI 53703 USA
>>>
>>> Phone: 608-274-2577
>>> Fax: 608-278-1475
>>> E-mail: thornton at tess-inc.com
>>> Web: www.tess-inc.com
>>>
>>>
>>>
>>> *----- Original Message -----*
>>> *From:* "Farah Gammoh" <farah.gammoh at industrial-solar.de>
>>> *Sent:* Thu, July 21, 2011 11:25
>>> *Subject:* [TRNSYS-users] Superheated Steam Properties
>>> **
>>>
>>> Hello,
>>>
>>> Could anyone tell me how to retrieve properties (enthalpy) of
>>> superheated steam? i assume steam_props() is for saturated steam only,
>>> right?
>>>
>>> Thanks in advance,
>>> Farah
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>
>>>
>>>
>>> ---------- 已转发邮件 ----------
>>> From: David BRADLEY <d.bradley at tess-inc.com>
>>> To: "Marcus.Joppich" <Marcus.Joppich at fh-zwickau.de>
>>> Date: Fri, 22 Jul 2011 09:33:18 -0500
>>> Subject: Re: [TRNSYS-users] sloping surfaces
>>> **
>>> Marcus,
>>> Vertical walls should have a slope of 90, not a slope of zero. Slopes
>>> are measured from the horizontal. A zero slope indicates a horizontal
>>> surface.
>>> Kind regards,
>>> david
>>>
>>>
>>> On 7/21/2011 08:01, Marcus.Joppich wrote:
>>>
>>> Hello David,****
>>>
>>> ** **
>>>
>>> thank you for your answer. I´ve tried it. The following steps were
>>> performed:****
>>>
>>> ** **
>>>
>>> I defined 6 orientations of walls to external: Northwest (Wall to
>>> external)/ Southeast (Wall to external)/ Northeast (Wall to external)/
>>> Northwest with a slope of 37 degrees (sloping roof)/ Southeast with a slope
>>> of 37 degrees (sloping roof)/ Northeast with a slope of 37 degrees (sloping
>>> roof).****
>>>
>>> ** **
>>>
>>> At Type109 I defined 6 surfaces with the following parameters:****
>>>
>>> Surface1/Slope of surface 0/Azimuth of surface 225****
>>>
>>> Surface2/Slope of surface 0/Azimuth of surface 135****
>>>
>>> Surface3/Slope of surface 0/Azimuth of surface 315****
>>>
>>> Surface4/Slope of surface 37/Azimuth of surface 225****
>>>
>>> Surface5/Slope of surface 37/Azimuth of surface 135****
>>>
>>> Surface6/Slope of surface 37/Azimuth of surface 315****
>>>
>>> ** **
>>>
>>> Then I connected the outputs with the inputs by Type56. ****
>>>
>>> ** **
>>>
>>> Is it the right way?****
>>>
>>> ** **
>>>
>>> I get a fatal error: “Error in automatic heat transfer calculation for
>>> surface 1 or its adjacent surface!: Automatic heat transfer calculation is
>>> only allowed on surfaces within a zone. Please check building input file
>>> (.bui)”, but I think it has a different reason.****
>>>
>>> Thank you for your help.****
>>>
>>> ** **
>>>
>>> Regards, Marcus****
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> *Von:* David BRADLEY [mailto:d.bradley at tess-inc.com<d.bradley at tess-inc.com>]
>>>
>>> *Gesendet:* Mittwoch, 20. Juli 2011 19:12
>>> *An:* Marcus.Joppich
>>> *Cc:* trnsys-users at cae.wisc.edu
>>> *Betreff:* Re: [TRNSYS-users] sloping surfaces****
>>>
>>> ** **
>>>
>>> Marcus,
>>> It depends somewhat on what component you are using to model the attic.
>>> However, almost without exception, you need to define the slope and azimuth
>>> of the attic roof surfaces in your weather component (Type15 probably) and
>>> then pass the appropriate solar radiation outputs from that component to the
>>> appropriate inputs of your building component.
>>> Regards,
>>> David
>>>
>>>
>>> On 7/20/2011 06:57, Marcus.Joppich wrote: ****
>>>
>>> Hello TRNSYS-users,****
>>>
>>> ****
>>>
>>> I try to simulate few rooms in an attic. I don´t understand how I can
>>> describe a sloping surface (like a sloping roof) with TRNSYS. Maybe you can
>>> help me.****
>>>
>>> ****
>>>
>>> Thanks for your time.****
>>>
>>> ****
>>>
>>> Marcus****
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> _______________________________________________****
>>>
>>> TRNSYS-users mailing list****
>>>
>>> TRNSYS-users at cae.wisc.edu****
>>>
>>> https://mailman.cae.wisc.edu/listinfo/trnsys-users****
>>>
>>>
>>>
>>> ****
>>>
>>> -- ****
>>>
>>> *******************************
>>>
>>> David BRADLEY****
>>>
>>> Principal****
>>>
>>> Thermal Energy Systems Specialists, LLC****
>>>
>>> 22 North Carroll Street - suite 370****
>>>
>>> Madison, WI 53703 USA****
>>>
>>> ** **
>>>
>>> P:+1.608.274.2577****
>>>
>>> F:+1.608.278.1475****
>>>
>>> d.bradley at tess-inc.com****
>>>
>>> ** **
>>>
>>> http://www.tess-inc.com****
>>>
>>> http://www.trnsys.com****
>>>
>>>
>>> --
>>> ***************************
>>> David BRADLEY
>>> Principal
>>> Thermal Energy Systems Specialists, LLC
>>> 22 North Carroll Street - suite 370
>>> Madison, WI 53703 USA
>>>
>>> P:+1.608.274.2577
>>> F:+1.608.278.1475d.bradley at tess-inc.com
>>> http://www.tess-inc.comhttp://www.trnsys.com
>>>
>>>
>>>
>>> ---------- 已转发邮件 ----------
>>> From: David BRADLEY <d.bradley at tess-inc.com>
>>> To: Baboo Gowreesunker <Baboo.Gowreesunker at brunel.ac.uk>
>>> Date: Fri, 22 Jul 2011 09:39:19 -0500
>>> Subject: Re: [TRNSYS-users] Number of Labels
>>> **
>>> Baboo,
>>> I think that limitation is only in the Studio. TRNSYS components can
>>> have as many labels as needed. If you can give me a bit more information
>>> about what you are using the labels for, I might be able to suggest a
>>> workaround. For example, a lot of the TRNSYS printer components (Type25,
>>> Type49, Type65) do not need input initial values so instead we treat those
>>> as labels.
>>> Best,
>>> David
>>>
>>>
>>> On 7/20/2011 10:40, Baboo Gowreesunker wrote:
>>>
>>> Can we add more than 5 labels in TRNSYS components****
>>>
>>> ** **
>>>
>>> Lesh****
>>>
>>> ** **
>>>
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>
>>>
>>> --
>>> ***************************
>>> David BRADLEY
>>> Principal
>>> Thermal Energy Systems Specialists, LLC
>>> 22 North Carroll Street - suite 370
>>> Madison, WI 53703 USA
>>>
>>> P:+1.608.274.2577
>>> F:+1.608.278.1475d.bradley at tess-inc.com
>>> http://www.tess-inc.comhttp://www.trnsys.com
>>>
>>>
>>> _______________________________________________
>>> TRNSYS-users mailing list
>>> TRNSYS-users at cae.wisc.edu
>>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110727/02618629/attachment-0005.htm>
More information about the TRNSYS-users
mailing list