[TRNSYS-users] SDHW example flow through solar panel....

[David BRADLEY]

Muhammad,
   The collector model (and all the other models) calculate temperatures 
even when there is no flow. The collector, for example calculates a 
stagnation temperature of the fluid sitting in the collector. If you are 
seeing a temperature difference across the collector and the outlet is 
below the inlet temperature) then that may be due to thermal losses from 
the fluid sitting in the collector.
Regards,
  David


On 7/25/2011 09:48, muhammad waseem wrote:
> Hi all,
> I am just wondering, why there is temperature at the inlet and outlet 
> of solar panel in SDHW example when there is no flow across the solar 
> panel.
> Looking forward to hearing from you soon.
> Thanks
> Kindest Regards
>
> -- 
>
> Muhammad Waseem Ahmad (Waz)
>
> PhD Researcher,
>
> Building Energy Research Group,
>
> Department of Civil and Building Engineering,
>
> Loughborough University,
>
> Loughborough, UK.
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110725/abc1757b/attachment-0001.htm>