[TRNSYS-users] TRNSYS ERROR (dll loaded but not found)

[Aaron J. Danenberg]

I have encountered an error when trying to run a simulation with a user
written component.  The list file indicates the Type has been loaded, then
later states that the type cannot be found.  See error received below.

 

*** Notice at time        :         0.000000

    Generated by Unit     : Not applicable or not available

    Generated by Type     : Not applicable or not available

    Message               : "Type203.dll" was found but did not contain any
components from the input file.

 

There is a Type 203 in the simulation, and then when it is called, it cannot
be found.

 

*** Fatal Error at time   :         0.000000

    Generated by Unit     :     2

    Generated by Type     :   203

    TRNSYS Message    105 : A TYPE was called in the TRNSYS input file but
was either not linked into trndll.dll or was not found in an external dll. A
dummy subroutine was called in its place. Please link the TYPE or remove it
from the input file

    Reported information  : Not available

 

The performa uses Type number 203, the dll was written with Type203 on the
first line of the code.

 

SUBROUTINE TYPE203 (TIME,XIN,OUT,T,DTDT,PAR,INFO,ICNTRL,*)

 

The dll i stored in the "Release Folder" in the User Lib.  Any ideas on how
this is happening?

 

Aaron J. Danenberg

Graduate Research Assistant

Candidate for Master of Mechanical Engineering, September 2011

University of Hartford

Dana Hall 103, Research Laboratory 1

200 Bloomfield Ave.

West Hartford, CT 06117

M: 203 - 610 - 2509

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110712/a301eb58/attachment-0001.htm>