[TRNSYS-users] (no subject)

[David BRADLEY]

Davide,
   TRNBuild refers to all opaque surfaces as "walls" whether they are in 
fact floors, roofs, ceilings, or doors. I would recommend adding your 
doors as "resistive only" because they usually have such low mass that 
their transfer function coefficients cannot be resolved. If your doors 
have significant amounts of glass area then treat them as windows 
instead of treating them as doors.
Best,
  David


On 1/30/2011 09:19, davide disco wrote:
> Goodmorning,
> I am a new TRNSYS' user and I have same trouble with TRNBuild.
> For example, how can I add doors to my thermal model?
> Thanks in advance.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110131/a4be4474/attachment-0005.htm>