[TRNSYS-users] TRNSYS Message 350

Cory Duggin crduggin at gmail.com
Tue Jan 25 17:05:23 PST 2011


I am getting the following error in my simulation:
"Unable to open the file associated with an ASSIGNED logical unit number.
Please check the ASSIGN statement and make sure that the file exists at the
specified location"
I have tried browsing the relocate each of the external files for their
respective types, but they are all where they should be and open fine.  What
else should I do?  I have a similar simulation that uses all the same files,
and it has no problems reading the files.  I am going to attach my .lst
file.  Thanks.

-- 
Cory Duggin, EI
Tennessee Tech University
Graduate Research Assistant
Mechanical Engineering
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110125/1d812b5a/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: solar_absorption_evac_tubes.lst
Type: application/octet-stream
Size: 106176 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110125/1d812b5a/attachment-0005.obj>


More information about the TRNSYS-users mailing list