[TRNSYS-users] (no subject)

[REYNIER Laurent]

Dear TRNSYS users,
I'm using the type 302 - Solar Air collector, and in particular, the version 302b2 (air flow above the absorber - surface roughness).
The problem is that, for some time steps, the outputs of the model are incorrect (the output file is filled with the mention NaN).
So i want to know if there are some known limitations for the use of this model (in the value of the inputs for example), some configurations of the model that doesn't work.
Does anybody have experienced the same problem ?

Thank you in advance for your help.
Sincerely yours.
Laurent.


Laurent REYNIER
Département ESE/ Division Energie/ Ingénieur Etudes et Recherche
Centre Scientifique et Technique du Bâtiment
84 avenue Jean Jaurès - Champs-sur-Marne - 77447 Marne-la-Vallée Cedex 2
Tél : 01 61 44 80 55
Fax : 01 64 68 83 50
Évitez d'imprimer vos emails inutilement. Respectez l'environnement
Ce message et toutes les pièces jointes sont confidentiels et exclusifs pour le destinataire du message. N'importe quelle autre distribution, utilisation ou reproduction est non autorisée et interdite. Si vous receviez ce message par erreur, informez svp l'expéditeur immédiatement et supprimez le message de votre système.
This message and any attachments are confidential, for the exclusive use of the addressee and may be legally privileged. Any other distribution, use or reproduction is unauthorised and prohibited. If you received this message in error, please notify the sender immediately and delete the message from your system

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110120/8e811cab/attachment-0005.htm>