[TRNSYS-users] Problem in Sketchup 8 -Trnsys 3d - Object Info does not work properly

[Usman Ijaz Dar]

Dear All,

I have following problem. I have created proper zone and then just a box building. Now when I want to change name etc in Trnsys 3d-->object info, a window with all kind of properties like building, etc comes but it is not active and it does not take any names. Picture is attached. Software is installed on windows 7. Idf is also attached with email.

Could you help me solving this problem because, I cannot make any building going like this. I have several times installed /uninstalled my software but problem persists


[cid:image001.jpg at 01CBBED9.3CC8E2D0]


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110128/f1c04f80/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 33161 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110128/f1c04f80/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Tutorial1.idf
Type: application/octet-stream
Size: 26617 bytes
Desc: Tutorial1.idf
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110128/f1c04f80/attachment-0001.obj>