[TRNSYS-users] Type 25: Start Time

[Adrien JEZEQUEL - ITF]

Dear Robert,

You can mutliply your output by something like GT(TIME,18) with equation 
tool and then connect that output with type 25.
Otherwise, you can treat your data with EXCEL after your simulation runs.

Best regards
------------------------------------------------------------------------
www.itf.biz <http://www.itf.biz>
www.itf.biz <http://www.itf.biz>

	Adrien JEZEQUEL
Simulations Thermiques Dynamiques
*ITF*
	62, Rue du Bolliet
73230 St Alban Leysse
FRANCE
Phone :
Fax :
Mail:
	+33(0) 479 750 029
+33(0) 479 852 122
a.jezequel at itf.biz

/Afin de contribuer au respect de l'environnement, merci de n'imprimer 
cet e-mail que si nécessaire
Please, consider our environmental responsability before printing this email
/

Le 05/01/2011 17:49, Robert.Haberl at solarenergy.ch a écrit :
>
> Dear TRNSYS-Users
>
> Is it possilbe to use with Type 25 a start time, that is not a 
> multiple to the printing interval?
>
> I would like to print in an 306 hours lasting simulation a daily value 
> starting after 18 hours (which is the initialization time).
>
> Thank you in advance for your answer!
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110105/7bd665e4/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logo_itf_signature.jpg
Type: image/jpeg
Size: 17526 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110105/7bd665e4/attachment-0001.jpg>