[TRNSYS-users] g95 compiler

Wed Feb 16 07:02:13 PST 2011

Marc

If you still want to use g95, an alternative is to define T0, Tfinal and
Timestep as parameters in our new component. The only drawback is that you
have to be careful to change those values whenever you change them in the
simulation studio.

Regards,

François Badinier
Development Engineer
ICAX Ltd
1 Berry Street 
London EC1M 5PS
francois.badinier at icax.co.uk
www.icax.co.uk

-----Original Message-----
From: trnsys-users-bounces at cae.wisc.edu
[mailto:trnsys-users-bounces at cae.wisc.edu] On Behalf Of mabadie at univ-lr.fr
Sent: 14 February 2011 11:57
To: trnsys-users at cae.wisc.edu
Subject: Re: [TRNSYS-users] g95 compiler

Danny and David,

I actually successfully used the G95 compiler with TRNSYS 16 to create  
new components. However, i was not able to properly used TRNSYS  
variables (such as getSimulationTime()) in my TYPES. The only solution  
i found was to stop using this compiler and buying Intel Fortran v11.

I hope you will find a way to fix that problem as it is nice to have  
the choice of a free/light fortran compiler.

Best,

-- Marc O. Abadie

David BRADLEY <d.bradley at tess-inc.com> a écrit :

> Danny,
>   getSimulationTime is a function that is defined in the data module  
> called "TrnsysFunctions." When compiling an external Type in either  
> the Compaq or the Intel compilers, I have to make sure that the  
> compiler is set to look for data modules (sometimes called MOD  
> files) in the ..\Trnsys17\Compilers\IVF111\Debug\ directory or else  
> copy them to some other place where they can be found by the  
> compiler. My understanding is that this tells the compiler "don't  
> worry, even though I haven't defined this function called  
> getSimulationTime() in my external Type242.dll, you'll find that  
> function during run-time because my dll will be called by a dll in  
> which the function is defined"
>
>   I don't know how the G95 compiler handles settings for where to  
> look for *.mod files but this is not specific to Trnsys17, there  
> were a number of TrnsysFunctions called by Types in Trnsys16 as  
> well. We have just expanded their use in Trnsys17.
> best,
>  David
>
>
> On 2/11/2011 11:12, Danny Jonas wrote:
>>
>> Dear TRNSYS users,
>>
>> I have use the directions in the document, but after starting the  
>> batch file to compile my own type I've received the following  
>> message:
>>
>> "In file Type201.for:72
>>
>>                Time=getSimulationTime<>
>>
>> Error: Function 'getsimulationtime' at <1> has no implicit type"
>>
>> could the error be associated with using TRNSYS17?
>>
>> Using the example (type242), I can build the type242.dll.
>>
>> I'm now trying to use C++, till now it works fine. But I still  
>> don't understand why it doesn't work with the batch file as fortran  
>> code....
>>
>> Thanks a lot,
>>
>> Best Regards,
>>
>> Danny
>>
>> -----Ursprüngliche Nachricht-----
>>
>> Von: Daniel Bergey [mailto:daniel at buildingscience.com]
>>
>> Gesendet: Mittwoch, 9. Februar 2011 21:14
>>
>> An: Danny Jonas
>>
>> Betreff: Re: [TRNSYS-users] g95 compiler
>>
>> I have successfully compiled a couple of components using  
>> directions in the attached document.  I don't recall the URL whence  
>> I downloaded it originally.  Sorry about the doc format; let me  
>> know if I should convert it.
>>
>> Daniel
>>
>> On Fri, Feb 04, 2011 at 01:33:49PM +0100, Danny Jonas wrote:
>>
>>>    Dear TRNSYS users,
>>
>>>
>>
>>>
>>
>>>
>>
>>>    I want to use the free g95 compiler to create my own components  
>>> in TRNSYS.
>>
>>>
>>
>>>
>>
>>>
>>
>>>    I have found the following message in the TRNSYS-users Archives:
>>
>>>
>>
>>>
>>
>>>
>>
>>>
>>
>>> [1]http://mailman.cae.wisc.edu/pipermail/trnsys-users/2008/003957.html
>>
>>>
>>
>>>
>>
>>>
>>
>>>    with the following link:
>>
>>>
>>
>>>
>>
>>>
>>
>>>    [2]http://software.cstb.fr/main/articles.asp?langue=us
>>
>>>
>>
>>>
>>
>>>
>>
>>>    But this page no longer exists.
>>
>>>
>>
>>>
>>
>>>
>>
>>>    Can someone send a link where I can download this example?
>>
>>>
>>
>>>
>>
>>>
>>
>>>
>>
>>>
>>
>>>    Thanks in advance,
>>
>>>
>>
>>>
>>
>>>
>>
>>>
>>
>>>
>>
>>>    Danny
>>
>>>
>>
>>>
>>
>>>
>>
>>> References
>>
>>>
>>
>>>    Visible links
>>
>>>    1.
http://mailman.cae.wisc.edu/pipermail/trnsys-users/2008/003957.html
>>
>>>    2. http://software.cstb.fr/main/articles.asp?langue=us
>>
>>> _______________________________________________
>>
>>> TRNSYS-users mailing list
>>
>>> TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
>>
>>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
> -- 
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI  53703 USA
>
> P:+1.608.274.2577
> F:+1.608.278.1475
> d.bradley at tess-inc.com
>
> http://www.tess-inc.com
> http://www.trnsys.com
>
>

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users