[TRNSYS-users] visual fortran run-time error

David BRADLEY d.bradley at tess-inc.com
Tue Feb 15 11:07:18 PST 2011


Pablo,
   The problem is most likely that Type56 is trying to write too big a 
number into the summary.bal file. The summary.bal file is formatted and 
in Fortran, when you do a formatted write statement, you have to declare 
how much space in the result file the number that you are about to write 
is allowed to take. For example, when programming, you might reserve 3 
spaces for your number. If you then try to write the number 1000 into 
that three-spot space, you'll get that error. Unfortunately, there isn't 
anything a user can do about it. I would recommend sending your project 
file to your distributor for assistance.
Kind regards,
  David


On 2/15/2011 07:03, Pablo Díaz Núñez wrote:
> Dear trnsys users,
>   I get an error after the simulation of my proyect:
>    Visual Fortran run-time error, forrtl: error (63): output 
> conversion error, unit 35, file SUMMARY.BAL
> Despite the error, the simulation runs but I want to fix it and I 
> don't find the problem.
> One thing I have noticed is that the number of these errors is 48, the 
> same as thermal zones I have in the .bui file.
> I'm looking the summary.bal file but I don't know where the problem is.
> Could someone help me?
> Thanks is advance.
> Pablo.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110215/123f4964/attachment-0005.htm>


More information about the TRNSYS-users mailing list