[TRNSYS-users] Total heating / cooling demand - type 56

[Mehdi Shahrestani]

Dear Matt

 

When you use "edit building" in type 56 two windows will open in the
TRNBUILD ( like attached picture) . First is "TRNBUILD manager" and the
second is "project ".

In "project" window on the bottom there is output button. If you go in, you
can define new outputs and also alter the existing ones.

Moreover, the list of all available output for Type 56 could be found in
volume 5 of Trnsys manual page 24.

Hope it helps

Regards

Mehdi

 

 

 



 

 

  _____  

From: trnsys-users-bounces at cae.wisc.edu
[mailto:trnsys-users-bounces at cae.wisc.edu] On Behalf Of Matt Wang
Sent: 10 February 2011 19:32
To: trnsys-users at cae.wisc.edu
Subject: Re: [TRNSYS-users] Total heating / cooling demand - type 56

 

 

Dear all,

 

I just figured out that the only thing I need to do is edit the output of
the building!

 

Best Regards,

Matt

 

 

  _____  

From: jaochen88 at hotmail.com
To: trnsys-users at cae.wisc.edu
Subject: Total heating / cooling demand - type 56
Date: Thu, 10 Feb 2011 11:20:49 -0800

 

Dear all,

 

Does any know how to output a file of heating or cooling demand for a
TRNBuild project? 

I did set up the cooling/heating set temperatures in the type managers and
the output of Type 56 was still only the air temperature of the zone.

(the temperature of the zone floated between the cooling and heating set
temperatures..)

 

Thanks,

Matt

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110210/f0b25c2e/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 134938 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110210/f0b25c2e/attachment-0003.jpg>