[TRNSYS-users] (no subject)

David BRADLEY d.bradley at tess-inc.com
Wed Feb 9 09:49:01 PST 2011


Davide,
   You just need to switch from defining a  "massive layer" to a 
"massless layer"
Regards,
  David


On 2/8/2011 18:23, davide disco wrote:
> Hello,
> when I add a wall I have to specify the layers that make up the wall, 
> and for each new layer Trnsys requires three quantities: conductivity, 
> capacity and density.
> Now, the capacity is expressed in KJ/(Kg K), but for the layers of 
> wall I have the thermal conductivity (expressed in W/m²·K) instead of 
> the capacity as required by the program.
> There is a way to correlate this two quantities so that I can enter 
> the thermal conductivity instead of the capacity?
>
> Thanks in advance
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110209/614ce2b2/attachment-0005.htm>


More information about the TRNSYS-users mailing list