[TRNSYS-users] Type 15-2_Simulation start time

[Matt Duffy]

Felix,

Due to how the TRNSYS Simulation Studio converts units of time and how the
TRNSYS engine uses that timestep, I simply recommend making a string
variable name for the timestep. Please refer to my attached example.

Best regards,

Matt Duffy

----- Original Message -----
From: "Felix Martin Beutefuehr, BLV-TGE" <beutefuf at fh-trier.de>
Sent: Wed, February 9, 2011 5:00
Subject:[TRNSYS-users] Type 15-2_Simulation start time


Dear Trnsys users,

I am using Type 15-2 and i am using a simulation timestep of 3 min. If the
simulation start time is 0 hr, everything works out fine. But once i change
the simulation starttime to 2000 hours i get the following error
massage_"unable to correctly read from the supplied data file-please check
the file and re-run the simulation". This massage refers to Type 15-2.
If I then change the simulation time step to 1 hour and re run the
simulation, no error occurs.

So what can I do to if I want a simulation time step within the range of 1-5
min?

Many thanks in advance

Felix

--
http://webmail.fh-trier.de

_______________________________________________
TRNSYS-users mailing list
TRNSYS-users at cae.wisc.edu
https://mailman.cae.wisc.edu/listinfo/trnsys-users


----- End of original message -----
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TIMESTEP.jpg
Type: image/jpeg
Size: 44400 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110209/41e0d158/attachment-0005.jpg>