[TRNSYS-users] TYPECK ()

[Farah Gammoh]

Hello,
could someone please explain to me the last three parameters of the 
typeck subroutine? what are the correct INPUT, PARAMETER and DERIVATIVE 
parameters to pass on? do they refer to the total number in the entire type?
thanks in advance
Farah
davide disco schrieb:
> Hello,
> when I add a wall I have to specify the layers that make up the wall, and for each new layer Trnsys requires three quantities: conductivity, capacity and density.
> Now, the capacity is expressed in KJ/(Kg K), but for the layers of wall I have the thermal conductivity (expressed in W/m²·K) instead of the capacity as required by the program.
> There is a way to correlate this two quantities so that I can enter the thermal conductivity instead of the capacity?
>
> Thanks in advance
>  		 	   		  
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>   


-- 

Mirroxx Logo <image002.gif>

 

	

* *

 

	

Farah Gammoh
MSc. Energy Conversion and Management

Engineering

	

*Mirroxx GmbH*

*Emmy-Noether-Str. 2*

*79110 Freiburg*

*Germany*

 

 

 

 

 

	

T (++49) 761 - 767 111-0

F (++49) 761 - 767 111-99

farah.gammoh at mirroxx.com <mailto:farah.gammoh at mirroxx.com>

www.mirroxx.com <http://www.mirroxx.com/>

	

*Register*

Amtsgericht Freiburg

HRB 703185