[TRNSYS-users] TESS library examples two types couldn't run

[CZ]

Hello, Matt:

Thank you for your reply.
But currently I'm using the TRNSYS version16.01.0003. I tried Type 705 and
Type 712 in my computer, and also in another computer which is also same
TRNSYS version and Windows 7, both of them couldn't run, and Type 705.lst
file even doesn't exist.
So do you think this is the TESS version problem, do I need to update the
TESS library?

Thank you,
Chelsea

On Thu, Feb 3, 2011 at 7:04 AM, Matt Duffy <duffy at tess-inc.com> wrote:

> Dear Chelsea,
>
> I was able to run those without any problems in TRNSYS 16.1. Please check
> the listing (*.lst) or log (*.log) file for more information about your
> errors.
>
> Those components are from the previous TESS Libraries 2.x. I strongly
> suggest contacting your local TRNSYS distributor to obtain the upgrade to
> TESS Libraries 17.01 and TRNSYS 17.00.0019.
>
> Best regards,
>
> Matt Duffy
>
>
> *----- Original Message -----*
> *From:* "CZ" <zh.chelsea at gmail.com>
> *Sent:* Wed, February 2, 2011 20:21
> *Subject:* [TRNSYS-users] TESS library examples two types couldn't run
>
>  Could you please try TESS models/studio projects/ground coupling
> library/Type 705 and Type 712?
> They are radiant slab with embedded pipes.
> These two examples can not run in my computer, and my computer has Windows
> 7.
>
> Thank you,
> Chelsea
>
>
> ------------------------------
>
> _______________________________________________
> TRNSYS-users mailing listTRNSYS-users at cae.wisc.eduhttps://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110207/138a763c/attachment-0005.htm>