[TRNSYS-users] Ahu coupled with a secondary heating / cooling system

[Matias Garcia]

Dear Trnsyws users,

I forgott to say that the supply air temperatures from the AHU are 20°C for
winter and 18°C for summer. i could understand that there is no change in
winter as my set point is 20°, but in summer with a set point temperature
between 24-28°C there should be a difference on the cooling load when
sending more or less air

2011/2/1 Matias Garcia <matias.garcia0 at gmail.com>

> Dear Trnsys users,
>
> I am simulaitng an AHU coupled with a secondary system for heating and
> cooling. For the secondary system I am using the heating and cooling type
> manager from Type 56. What I obtain is independtly from the air change rate
> imposed by the mechanical ventilation, the cooling and heating loads of the
> type manager remain the same. Are the heating and cooling type managers not
> adequate to simulate this or I am doing something wrong?
>
> Thanks in advance!
>
> Matias
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110201/3ec2eec9/attachment-0005.htm>