[TRNSYS-users] Active layer dividing

Adrien JEZEQUEL - ITF a.jezequel at itf.biz
Tue Feb 1 05:28:18 PST 2011


Dear Wang,

If you divide your surface, you'll be able to put a lower inlet mass
flowrate.

Best regards
------------------------------------------------------------------------
www.itf.biz <http://www.itf.biz>
www.itf.biz <http://www.itf.biz>

	Adrien JEZEQUEL
Simulations Thermiques Dynamiques
*ITF*
	62, Rue du Bolliet
73230 St Alban Leysse
FRANCE
Phone :
Fax :
Mail:
	+33(0) 479 750 029
+33(0) 479 852 122
a.jezequel at itf.biz

/Afin de contribuer au respect de l'environnement, merci de n'imprimer
cet e-mail que si nécessaire
Please, consider our environmental responsability before printing this email
/

Le 01/02/2011 13:48, 王洋 a écrit :
> Dear all,
>
> I defined a active layer, but it shows ERROR as follows:
>
>
>
>
> Fatal Error at time : 0.350000
> Generated by Unit : 4
> Generated by Type : 56
> Message : Specific fluid mass flow of active layer in surface 7 below
> minimum value of 5.35 kg/m2h Please, increase the minimum mass flow
> rate or use the autosegmentation feature of TRNBuild for subdividing
> the surface.
>
>
>
> But the min. allowed inlet mass flowrate is 5.37 kg/m2h, I defined the
> min. desired inlet mass flowrate is 5.4 kg/m2h.
> The ATTACHED is the detailed setting of ACTIVE LAYER SPECIFICATION.
> Please have a look and tell me how to correctly define them?
>
> Please tell me how to increase the minimum mass flow rate? Where is it
> in detail? I want to get only one surface not dividing it. Please tell
> me how to get only one segmentation in detail?
>
>
> Many thanks!
>
>
> Br.
>
> wang
>
> 在 2011年2月1日 上午11:21,王洋 <wanghongyang1767 at gmail.com
> <mailto:wanghongyang1767 at gmail.com>>写 道:
>
>     Dear all,
>
>     I defined a active layer, but it shows ERROR as follows:
>
>
>
>
>     Fatal Error at time : 0.350000
>     Generated by Unit : 4
>     Generated by Type : 56
>     Message : Specific fluid mass flow of active layer in surface 7
>     below minimum value of 5.35 kg/m2h Please, increase the minimum
>     mass flow rate or use the autosegmentation feature of TRNBuild for
>     subdividing the surface.
>
>
>
>     But the min. allowed inlet mass flowrate is 5.37 kg/m2h, I defined
>     the min. desired inlet mass flowrate is 5.4 kg/m2h.
>     The ATTACHED is the detailed setting of ACTIVE LAYER
>     SPECIFICATION. Please have a look and tell me how to correctly
>     define them?
>
>     Please tell me how to increase the minimum mass flow rate? Where
>     is it in detail? I want to get only one surface not dividing it.
>     Please tell me how to get only one segmentation in detail?
>
>
>     Many thanks!
>
>
>     Br.
>
>     wang
>
>     2011/1/31 <trnsys-users-request at cae.wisc.edu
>     <mailto:trnsys-users-request at cae.wisc.edu>>
>
>         Send TRNSYS-users mailing list submissions to
>         trnsys-users at cae.wisc.edu <mailto:trnsys-users at cae.wisc.edu>
>
>         To subscribe or unsubscribe via the World Wide Web, visit
>         https://mailman.cae.wisc.edu/listinfo/trnsys-users
>         or, via email, send a message with subject or body 'help' to
>         trnsys-users-request at cae.wisc.edu
>         <mailto:trnsys-users-request at cae.wisc.edu>
>
>         You can reach the person managing the list at
>         trnsys-users-owner at cae.wisc.edu
>         <mailto:trnsys-users-owner at cae.wisc.edu>
>
>         When replying, please edit your Subject line so it is more
>         specific
>         than "Re: Contents of TRNSYS-users digest..."
>
>         Today's Topics:
>
>         1. Re: Using Equations with Initial Values (David BRADLEY)
>
>
>         ---------- 已转发邮件 ----------
>         From: David BRADLEY <d.bradley at tess-inc.com
>         <mailto:d.bradley at tess-inc.com>>
>         To: "Aaron J. Danenberg" <danenberg at hartford.edu
>         <mailto:danenberg at hartford.edu>>
>         Date: Mon, 31 Jan 2011 11:54:09 -0600
>         Subject: Re: [TRNSYS-users] Using Equations with Initial Values
>         Aaron,
>         Type93 will do exactly that.
>         Best,
>         David
>
>
>         On 1/31/2011 11:42, Aaron J. Danenberg wrote:
>>
>>         In the simulation studio I am using the equation feature. For
>>         the first time step, I need a variable in the equation to be
>>         some defined constant value, for the following time step I
>>         need that variable to be the output of another component of
>>         the previous time step. Does anyone know how to do this?
>>
>>         Aaron J. Danenberg
>>
>>         University of Hartford
>>
>>         Mechanical Engineering Graduate Student
>>
>>         danenberg at hartford.edu <mailto:danenberg at hartford.edu>
>>
>>
>>         _______________________________________________
>>         TRNSYS-users mailing list
>>         TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
>>         https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>         -- 
>         ***************************
>         David BRADLEY
>         Principal
>         Thermal Energy Systems Specialists, LLC
>         22 North Carroll Street - suite 370
>         Madison, WI  53703 USA
>
>         P:+1.608.274.2577
>         F:+1.608.278.1475
>         d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
>
>         http://www.tess-inc.com
>         http://www.trnsys.com
>
>
>         _______________________________________________
>         TRNSYS-users mailing list
>         TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
>         https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110201/0b4f9688/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: logo_itf_signature.jpg
Type: image/jpeg
Size: 17526 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110201/0b4f9688/attachment-0001.jpg>


More information about the TRNSYS-users mailing list