[TRNSYS-users] Error generating Shading/insolation matrix

[David BRADLEY]

Rémy,
  You might be right about the windows being too close to the zone 
boundaries. I usually keep about a 10-15cm border around my windows even 
in a case where the window goes all the way to the edge of the actual 
zone. I also notice that it looks like there are curved corners on the 
roof/shading device at the top of the building. I wasn't able to zoom in 
and see whether in fact these are a series of straight lines 
approximating a curve or whether it is actually a curve. In any case, I 
would make sure that it is a series of straight lines to approximate a 
curve.
Best,
  David


On 8/22/2011 10:34, Rémy Saulnier wrote:
> Dear all,
> I got an error when I try to generate Shading/insolation matrix. It 
> tells me "insufficient virtual memory" (see picture attached).
> I have no problem when importing .idf file and this project is really 
> simple (picture attached).
>
> I wonder if this could be because my windows are too close of the 
> edges of the walls?
> I also attach my idf file if this can help.
>
> Thanks for your help,
> Regards.
> -- 
>
> *Rémy SAULNIER*
>
> *HOLISUD - Energie et Environnement*
>
> 21 rue de la Digue
>
> 31300 TOULOUSE
>
> www.holisud.fr <http://www.holisud.fr/>
>
> Ligne Directe : +33 (5) 62 21 45 30
>
> Fax : +33 (5) 61 42 17 69
>
> **
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110822/14b8bd0a/attachment-0005.htm>