[TRNSYS-users] COPY NEW COMPONENT IN NEW MACHINE
David BRADLEY
d.bradley at tess-inc.com
Thu Aug 25 08:18:26 PDT 2011
Oswaldo,
yes, very clear! thank you. That is what I had understood about the
problem the first time but then I thought I had missed something when I
saw some of the other hints. My original guess still holds. I think
there is something corrupted about your proforma (the *.tmf file).
Please send it to me or to your distributor and we can try and get it
sorted out.
Kind regards,
David
On 8/24/2011 16:30, Oswaldo Hidalgo Barrientos wrote:
> Hi David
> well, In the first mail i think which is explained my problem. I dont
> say that trnsys show me a ERROR or a MESSAGE...I cant even start a
> simulation with my new component. When I copy the .DLL file and the
> proforms files in the specific folder in the target computer, my new
> component is show in the "tree components" in the "simulation studio"
> but inmediatly when I try move the new component of "tree components"
> to space work of "simulation studio" or I do double click under Type
> (to open proform), Trnsys is closes automatically without show some
> error message or anything.
>
> Well now. I just copied successfully my new component in other laptop
> but the problems is in other target machines in my college, this
> computers have the same version trnsys and the same licence that my
> laptops, the only differences would be hardware maybe and that the
> target machines of the college are conected to an intranet managed for
> a server...i dont know if the problem is by this or by other stuff.
>
> I dont have problems with the simulation because simply I could not
> start a simulation. i cant implement the proforma in a new project. My
> problem is before simulation.
>
> i was clear?
>
>
>
> 2011/8/24 David BRADLEY <d.bradley at tess-inc.com
> <mailto:d.bradley at tess-inc.com>>
>
> Oswaldo,
> I had understood from your first email that you were getting an
> error when opening a proforma on the target machine (ie nothing to
> do with actually /running /a simulation). Some of the other
> responses have been aimed at solving a run-time problem (in other
> words you can implement the proforma in a new project on the
> target machine but you get an error when you run the simulation.
> Can you please clarify?
> Kind regards,
> David
>
>
>
> On 8/24/2011 14:17, Oswaldo Hidalgo Barrientos wrote:
>> Hi Christiana and users, thanks so much
>>
>> Really, i dont know if target machines, have the microsoft VC++
>> redist pack libs installed or updated...I will check...
>> but i have other question with the above, does this is without
>> regardless if my new component was developed in Compac Visual
>> Fortran 6?....also I have the problem that target machines are
>> conected from a internal network and are managed by a server
>> machine....do should copy the new component (dll and proforms) in
>> the server machine or in every target machine?
>>
>> Regards
>>
>> Oswaldo
>>
>> 2011/8/23 Christian Glück <christian.glueck at kit.edu
>> <mailto:christian.glueck at kit.edu>>
>>
>> Hi Oswaldo,
>>
>> do you have the Micro$oft VC++ redist pack libs installed on
>> the target computer?
>> I've had a similar problem once, it's here: http
>> <https://mailman.cae.wisc.edu/pipermail/trnsys-users/2010/005826.html>s://mailman.cae.wisc.edu/pipermail/trnsys-users/2010/005826.html
>> <https://mailman.cae.wisc.edu/pipermail/trnsys-users/2010/005826.html>
>>
>> Maybe that's it.
>>
>> Regards,
>> Christian
>>
>>
>>
>>
>>
>> On 08/23/2011 07:00 PM, trnsys-users-request at cae.wisc.edu
>> <mailto:trnsys-users-request at cae.wisc.edu> wrote:
>>
>>
>> Dear all.
>>
>> I am trying copy in other computers a new component developed
>> in my laptop ...I copy the file ".dll" in
>> /trnsys17/userlib/ReleaseDLLS and the files ".tmf" (proforma)
>> to copy in trnsys17/studio/proformas/new folder.....anyway, I
>> do all this stuff....once
>> open the simulation studio in new computer, the new
>> component is show in the tree of components, no problem until
>> then, but inmediatly when I try move the new component of
>> tree to space work of simulation studio or I do double click
>> under Type the Trnsys is closes.
>> Really I dont know what happen...I can understand that the
>> new component does not work, but which trnsys closes
>> automatically?
>> in all my pc, trnsys is with license.
>>
>> i have three question.
>> 1. What I can do?
>> 2. Does It creates some link between the computer and my pc
>> when is develope the proforma, export to fortran, compile and
>> build ".dll"?
>> 3. How i can limit the copy of my new component to a certain
>> number of pc with the userID? or What I can do to that my new
>> component be of free copy?
>>
>> thanks all
>>
>> Oswaldo.
>>
>>
>>
>> _______________________________________________
>> TRNSYS-users mailing list
>> TRNSYS-users at cae.wisc.edu <mailto:TRNSYS-users at cae.wisc.edu>
>> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
> --
> ***************************
> David BRADLEY
> Principal
> Thermal Energy Systems Specialists, LLC
> 22 North Carroll Street - suite 370
> Madison, WI 53703 USA
>
> P:+1.608.274.2577 <tel:%2B1.608.274.2577>
> F:+1.608.278.1475 <tel:%2B1.608.278.1475>
> d.bradley at tess-inc.com <mailto:d.bradley at tess-inc.com>
>
> http://www.tess-inc.com
> http://www.trnsys.com
>
>
--
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI 53703 USA
P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com
http://www.tess-inc.com
http://www.trnsys.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110825/a782c6d3/attachment-0001.htm>
More information about the TRNSYS-users
mailing list