[TRNSYS-users] Type 60d

David BRADLEY d.bradley at tess-inc.com
Thu Aug 11 09:14:28 PDT 2011


Kamil,
   It is hard to know what might be causing the behavior in your 
simulation without seeing your project. I would recommend that you 
contact your distributor and send them the *.tpf file so that they can 
have a look.
Best,
  David


On 8/9/2011 14:33, kamil kolodziejczyk wrote:
>
> Hi
>
> I have modelled a simple SDHW system using type 60d with one heat 
> exchanger and no auxilary heaters. Single speed pump, solar collector, 
> 2 pipes, controller and tank. So far everything is working well, 
> however  I have  (or it is just my displeasure)one problem: when I run 
> the simulation the temperature within the tank doesnt change much, it 
> doesnt response to the solar radiation and is nowhere close to the 
> temperature leaving the collector. When the temperature leaving the 
> collector increase the tank temp goes down.I attached the screen from 
> the simulation.     If someone know solution please  help
>
> Kami
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110811/8648b463/attachment-0001.htm>


More information about the TRNSYS-users mailing list