[TRNSYS-users] Type22 - controlling floor-heating/cooling

[David BRADLEY]

Daniel,
   Often when writing controller models, I add an input or a parameter 
to tell the controller whether it is operating in heating mode (ie ON 
when a temperature is too low) or in cooling mode (ON when the 
temperature is too high). Type22 does not have such a mode so you might 
need to use two of them, one looking at the temperature difference for 
heating times and one looking at an inverted temperature difference for 
cooling.
Kind regards,
  David


On 4/15/2011 09:03, Daniel Bader wrote:
>
> Dear TRNSYS-Users,
>
> I have a little problem to control my floor-heating- and cooling-system:
>
> I use Type22 -- Iterative feedback controller -- to regulate the 
> massflowrate of the floor-system.
>
> The inlet temperature is controlled by the mean outside temperature of 
> the day before.
>
> In times when the floor is used for cooling the building, the 
> Type22-controller works perfectly.
>
> But in times when heating is needed, the controller doesn't use the 
> threshold-function to stop the massflow if the rooms are getting too 
> hot (because of internal gains).
>
> Think for example at a room in winter with outside temperature about 0°C.
>
> In the night and in the early hours there will be a heating demand, so 
> an inlet-temperature of about 22°C is used for heating.
>
> When the room is used (with lots of internal gains) the inlet 
> temperature of 22°C is used for cooling!
>
> The problem is that you cannot control both (heating and cooling).
>
> Also by adding an on/off command to type22 (like: off when Tair > 
> Twanted -- I tried a lot more) doesn't work.
>
> See also the attached graph (I hope you can understand the problem).
>
> Does someone have experiences with that problem to  solve this problem?
>
> I would be very pleased for any help!
>
> Thank you in advanced.
>
> Kind regards / Freundliche Grüße
>
> i.A. Dipl.-Ing.(FH) Daniel Bader
>
> **
>
> *GN Bauphysik Ingenieurgesellschaft mbH***
>
> Bahnhofstr. 27
>
> 70372 Stuttgart
>
> Tel.: 0711-9548800
>
> Fax: 0711-564613
>
> www.gn-bauphysik.com <blocked::http://www.gn-bauphysik.com/>
>
> Geschäftsführer: Dipl.-Ing. (FH) Manfred Finkenberger
>
> Sitz der Gesellschaft: Stuttgart, HRB 14870
>
> Beschreibung: Beschreibung: W:\GN\Zertifizierung-Planer am 
> Bau\TÜV-Stempel.JPG
>
> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte 
> Informationen. Wenn Sie nicht der richtige Adressat
>
> sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie 
> bitte sofort den Absender und vernichten Sie diese
>
> Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser 
> Mail ist nicht gestattet.
>
> This e-mail may contain confidential and/or privileged information. If 
> you are not the intended recipient (or have
>
> received this e-mail in error) please notify the sender immediately 
> and destroy this e-mail. Any unauthorized copying,
>
> disclosure or distribution of the material in this e-mail is strictly 
> forbidden.
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110415/f755d9fe/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2779 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110415/f755d9fe/attachment-0003.jpe>