[TRNSYS-users] save the Animation file of TRNSYS3d

Marcus jones.0bj3 at gmail.com
Thu Apr 7 09:27:09 PDT 2011 

I just happened to coincidentally upload such an animation today

http://www.optimalenergetics.com/Blog/?p=75

And am therefore compelled to comment; I agree that the best way is to
simply record the screen using any screen capture software. Sketchup Pro
version 8 has an embedded animation export, but I haven't tried it. I would
also recommend exporting to multiple file formats and testing before your
presentation, just in case!

Cheers,

Marcus
-- 
Marcus Jones, LEED AP, M.Sc.
*Freelance energy consultant*
*Vienna, Austria


*
On Thu, Apr 7, 2011 at 2:47 PM, Daniel Bader
<Daniel.Bader at gn-bauphysik.com>wrote:

> Dear Wang,
>
>
>
> I always use the Freeware-Tool „HyperCam” to create a movie (like a
> Screenshot).
>
> Therefore I run the Animation in SketchUp and record it.
>
> The DVI-file can be implemented in PowerPoint.
>
>
>
> You can download HyperCam here:
>
> http://www.chip.de/downloads/HyperCam_12994368.html
>
>
>
> Kind regards / Freundliche Grüße
>
>
>
> i.A. Dipl.-Ing.(FH) Daniel Bader
>
> * *
>
> *GN Bauphysik Ingenieurgesellschaft mbH***
>
> Bahnhofstr. 27
>
> 70372 Stuttgart
>
> Tel.: 0711-9548800
>
> Fax: 0711-564613
>
> www.gn-bauphysik.com
>
> Geschäftsführer: Dipl.-Ing. (FH) Manfred Finkenberger
>
> Sitz der Gesellschaft: Stuttgart, HRB 14870
>
>
>
> [image: Beschreibung: Beschreibung: W:\GN\Zertifizierung-Planer am
> Bau\TÜV-Stempel.JPG]
>
>
>
> Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
> Informationen. Wenn Sie nicht der richtige Adressat
>
> sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte
> sofort den Absender und vernichten Sie diese
>
> Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail
> ist nicht gestattet.
>
>
>
> This e-mail may contain confidential and/or privileged information. If you
> are not the intended recipient (or have
>
> received this e-mail in error) please notify the sender immediately and
> destroy this e-mail. Any unauthorized copying,
>
> disclosure or distribution of the material in this e-mail is strictly
> forbidden.
>
>
>
>
>
> *Von:* trnsys-users-bounces at cae.wisc.edu [mailto:
> trnsys-users-bounces at cae.wisc.edu] *Im Auftrag von *??
> *Gesendet:* Donnerstag, 7. April 2011 09:59
> *An:* trnsys-users at cae.wisc.edu
> *Betreff:* [TRNSYS-users] save the Animation file of TRNSYS3d
>
>
>
> Dear all,
>
> how to save the Animation file of TRNSYS3d that I made? And how to show or
> play it in Powerpoint or not in SKETCHUP system? I want to show the finished
> Animation file of TRNSYS3d in Powerpoint to other people etc..
>
> Many thanks!
>
> Br.
>
> wang
>
> 2011/4/6 <trnsys-users-request at cae.wisc.edu>
>
> Send TRNSYS-users mailing list submissions to
>        trnsys-users at cae.wisc.edu
>
> To subscribe or unsubscribe via the World Wide Web, visit
>        https://mailman.cae.wisc.edu/listinfo/trnsys-users
> or, via email, send a message with subject or body 'help' to
>        trnsys-users-request at cae.wisc.edu
>
> You can reach the person managing the list at
>        trnsys-users-owner at cae.wisc.edu
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of TRNSYS-users digest..."
>
> Today's Topics:
>
>   1. Re: Error 427 (Matt Duffy)
>   2. Compyling with Microsoft Visual Studio 2010 on    Windows 7
>      (Philip Horn)
>   3. Re: TRNSYS models for longwave radiation exchange withina
>      zone (Matt Duffy)
>   4. Re: Water-to-Water Thermofrigopump - Type 668 (Matt Duffy)
>   5. Re: Coupling error: MATLAB R2009b with TRNSYS 17.00.0016
>      (Matt Duffy)
>   6. Re: Need some help with type 77( Simple groundTemperature
>      Model) (Matt Duffy)
>
>
> ---------- 已转发邮件 ----------
> From: "Matt Duffy" <duffy at tess-inc.com>
> To: "muhammad waseem" <m.waseem.ahmad at gmail.com>,
> trnsys-users at cae.wisc.edu
> Date: Wed, 6 Apr 2011 12:13:15 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Error 427
> Dear Muhammad Waseem,
>
> I just briefly looked at your *.log file and saw something that I would
> strongly suggest changing, "C:\Trnsys17\Trnsys16\Tess
> Models\SampleCatalogData". It seems that you installed TRNSYS17 with your
> TRNSYS16 directory? Furthermore, you are referencing the old TESS Libraries
> 2.04 external DLL's and not the new 17.01 TESS Libraries? Thus, I am going
> to strongly recommend that you cleanly install TRNSYS 17.00.0019 and the
> TESS Libraries 17.01 in a brand new directory to avoid any confusion, and
> that create and simulate your system with the new and improved components.
> If you have any problems, please contact your local TRNSYS Distributor
> (which I believe is us, TESS, techsupport at tess-inc.com).
>
> Best regards,
>
> Matt Duffy
>
> *----- Orig! inal Message -----*
> *From:* "muhammad waseem" <m.waseem.ahmad at gmail.com>
> *Sent:* Wed, April 6, 2011 5:57
> *Subject:* [TRNSYS-users] Error 427
>
>
>
>
>
>
>
> Hi,
>
> I am trying to Simulate a heat pump assisted solar system but I am getting
> error 427. I dont know how to figure it out. Could you please help me out.
> Attached ! with this email are my project files. Also previously I was not
> getting any flow through out my system (Any idea), I dont know what will
> happen after figuring this error out? Last thing is there any other way I
> can Simulate heat pump without having manufacture's data?
>
>
>
> Looking forward to hearing from you.
>
>
>
>
>
> Kindest Regards
>
>
>
> --
>
> Muhammad Waseem Ahmad (Waz)
>
> PhD Researcher,
>
> Building Energy Research Group,
>
> Department of Civil and Building Engineering,
>
> Loughborough University,
>
> Loughborough, UK.
>
>  [image: Beschreibung: Das Bild wurde vom Absender entfernt.]
>
>
> ------------------------------
>
> _______________________________________________
>
> TRNSYS-users mailing list
>
> TRNSYS-users at cae.wisc.edu
>
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
>
> ---------- 已转发邮件 ----------
> From: Philip Horn <phorn at fraunhofer.org>
> To: "trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
> Date: Wed, 6 Apr 2011 15:41:17 -0400
> Subject: [TRNSYS-users] Compyling with Microsoft Visual Studio 2010 on
> Windows 7
> Dear All,
>
> has anyone compiled a TRNSYS Type with Microsoft Visual Studio 2010 on
> Windows 7 and Intel Visual Fortran 2010 (using TRNSYS17)?
> I face many problems with trying so (modifying Type 551 in special)...
>
> One question is, what .exe file do I have to specify in the  TRNSYS
> Settings- Directories for "Fortran Environment"?
> Standard  setting should be :C:\Program Files\Microsoft Visual
> Studio\Common\MSDEV98\BIN\dfdev.exe I guess...
> But for MS VS 2010 I can not find the dfdev.exe file.
> The C++ environment path should change as well then I guess, right?
>
> and what about the compiler command "msdev.exe" ? What should I use here?
>
> Up to what I've read till now it makes sense to use a windows XP machine
> and Compaqu Visual fortran 6.6B.
> Then the compiling should be pretty straight forward.
> Can someone confirm that, or give any advice?
>
> I am currently reading into "language W" and "W editor" from CSTB as well
> to check wether this would do the job.
>
> Would be great to get some input from the experience users out there!!
>
> Thanks a lot in advance!!!
>
> Best,
> Philip
>
>
>
>
>
> ---------- 已转发邮件 ----------
> From: "Matt Duffy" <duffy at tess-inc.com>
> To: "simge andolsun" <simgeandolsun at gmail.com>, trnsys-users at cae.wisc.edu
> Date: Wed, 6 Apr 2011 15:10:02 -0500 (CDT)
> Subject: Re: [TRNSYS-users] TRNSYS models for longwave radiation exchange
> withina zone
>
> Dear Simge,
>
> Section 5.4.1.6. of the documentation goes into detail about the long wave
> radiation exchange. There was also a paper at BS2009.
> http://www.ibpsa.org/proceedings/BS2009/BS09_1983_1988.pdf
>
>
> Best regards,
>
> Matt Duffy
>
> ----- Original Message -----
> From: "simge andolsun" <simgeandolsun at gmail.com>
> Sent: Mon, April 4, 2011 21:23
> Subject:[TRNSYS-users] TRNSYS models for longwave radiation exchange
> withina zone
>
>
> Dear TRNSYS users,
>
> I am trying to understand the differences between the three radiation
> models listed under "Longwave radiation exchange within a zone" in
> "Radiation Modes of Thermal Zone" feature of TRNBuild. These models
> are:
>
> 1) Standard model (starnet model)
> 2) Simple model (one node model with combined heat transfer coeff.)
> 3) Detailed model (based on view factors)
>
> The manuals do not refer to these radiation models using the exact
> names listed in TRNBuild; therefore I am feeling difficulty
> understanding which of the three models is actually being discussed.
> Could you please briefly explain the primary differences between the
> calculations of these radiation models? I would also appreciate it
> very much if you could direct me to the specific sections of the
> manual (or to the related papers/thesis) that I should read to learn
> more about each model.
>
> Thanks in advance,
> Best,
> Simge Andolsun
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
>
>
> ----- End of original message -----
>
>
>
>
> ---------- 已转发邮件 ----------
> From: "Matt Duffy" <duffy at tess-inc.com>
> To: "Augustin CUQ" <augustin.cuq at gmail.com>, trnsys-users at cae.wisc.edu
> Date: Wed, 6 Apr 2011 15:21:05 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Water-to-Water Thermofrigopump - Type 668
> Dear Augustin,
>
> Yes, there is a better component. Type668 evolved into Type927 (single
> stage) and Type1221 (two stage). These components have normalized data
> files, so you can scale the capacity/power accordingly. These components are
> in the TESS Libraries 17.
>
> Best regards,
>
> Matt Duffy
>
> *----- Original Message -----*
> *From:* "Augustin CUQ" <augustin.cuq at gmail.com>
> *Sent:* Tue, April 5, 2011 4:19
> *Subject:* [TRNSYS-users] Water-to-Water Thermofrigopump - Type 668
>
> Hi everyone,
>
> I am trying to model a "thermofrigopump", to obtain b! oth cooling and
> heating gains through a device.
> After calculating the most important demand between heating and cooling
> demands, the idea is to generate heat if heating demands is higher (or to
> cool the fluid in the other case) and to use either the annex cold
> production or the annex heat production for others uses. So that I need a
> heat pump system which calculates both heat and cool power.
> I was thinking to use Type 668 to model that. Is their a better Type to do
> that and is that relevant?
>
> Thank's in advance for helping me, and sorry for the english mistakes..
>
> --
> Augustin CUQ
> ------------------------------
>
> _______________________________________________
>
> TRNSYS-users mailing list
>
> TRNSYS-users at cae.wisc.edu
>
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
>
> ---------- 已转发邮件 ----------
> From: "Matt Duffy" <duffy at tess-inc.com>
> To: "Mierlo, B.P. van" <b.p.v.mierlo at student.tue.nl>,
> trnsys-users at cae.wisc.edu
> Date: Wed, 6 Apr 2011 15:24:47 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Coupling error: MATLAB R2009b with TRNSYS
> 17.00.0016
>
> Dear Peter,
>
> To the best of my knowledge, I believe there was an update to that DLL (in
> the ".\EXE\DLLs\Type155" directory) for TRNSYS version 17.00.0018. Please
> note that the current version is 17.00.0019, so please email your TRNSYS
> distributor to obtain the latest.
>
> Best regards,
>
> Matt Duffy
>
>
> ----- Original Message -----
> From: "Mierlo, B.P. van" <b.p.v.mierlo at student.tue.nl>
> Sent: Tue, April 5, 2011 5:03
> Subject:[TRNSYS-users] Coupling error: MATLAB R2009b with TRNSYS 17.00.0016
>
>
> Hi,
>
> I have a question about the coupling of MATLAB R2009b (32-bit) with TRNSYS
> 17.
>
> I tried testing the link between the two with the "Calling Matlab" example
> found in
> the folder "Trnsys17\Examples\Calling_Matlab".
>
> According to the instructions I must ensure that the MATLAB folder in the
> Windows
> Search Path is, I did this through Configuration Panel -> System ->
> Advanced System
> Settings -> Advanced -> Environment Variables adding the text "C:\Program
> Files\MATLAB\R2009b\bin\win32 " to System Variable "Path".
> Next, I ensured that I use for the specific Type155.dll MATLAB version. I
> did this
> through extracting the DLL in the zip file "Trnsys17\EXE\DLLs\Type155
> (forMatlab2009b)-CVF.zip"  to "Trnsys17\Exe" and the overwriting the old
> Type155.dll
> (for MATLAB R2006). According to the description this would be sufficient.
>
>
>
> To be sure I also copied the files libeng.lib, libmat.lib, and libmex.lib
> libmx.lib
> from "C:\Program Files\MATLAB\R2009b\external\lib\win32\microsoft" to
> "C:\Trnsys17\SourceCode\Optional".
>
>
>
> However, I continue to the error "One error was found in the deck. Check
> the listing
> file for more information!" get. When I look in the log, I find a fatal
> error with
> description "Your input file uses Type 155 (Calling Matlab). "Type155.dll"
> was found
> but could not be loaded. Please make sure that a supported version of
> Matlab is
> installed and that Matlab's "bin\win32" folder is on Windows' search path".
>
>
>
> Now I searched the internet for a solution, and I came across something
> about
> recompiling TRNSYS with the Compaq Visual Fortran Compiler:
> http://sel.me.wisc.edu/trnsys/trnlib/trnsys-matlab/type155-manual.html
> This explanation, however, is based on TRNSYS 15 and I am not sure if it's
> needed
> for TRNSYS 17.
>
>
>
> Could someone tell me the proper way to link MATLAB & TRNSYS for the
> versions
> mentioned in the subject?
>
>
>
> Thanks in advance,
>
>
>
> Peter van Mierlo, BSc
>
> Eindhoven University of Technology
>
> The Netherlands
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
>
> ----- End of original message -----
>
>
>
>
> ---------- 已转发邮件 ----------
> From: "Matt Duffy" <duffy at tess-inc.com>
> To: charlene.daville at googlemail.com, trnsys-users at cae.wisc.edu
> Date: Wed, 6 Apr 2011 15:32:48 -0500 (CDT)
> Subject: Re: [TRNSYS-users] Need some help with type 77( Simple
> groundTemperature Model)
> Hello Charlene,
>
> It seems to work just fine in my version? Please make sure that you have
> TRNSYS version 17.00.0019.
>
> Thank you,
>
> Matt Duffy
>
> *----- Original Message -----*
> *From:* "Charlène Davillé" <charlene.daville at googlemail.com>
> *Sent:* Tue, April 5, 2011 8:55
> *Subject:* [TRNSYS-users] Need some help with type 77( Simple
> groundTemperature Model)
>
> Hello everybody,
>
>
> As mentioned in my message topic,  I'm using the type 77 which models the
> ground temperature.
> However, when I try to simulate with this type I get  this following error
> :
>
> *Error : TRNSYS Message    105 : A TYPE was called in the TRNSYS input
> file but was either not linked into trndll.dll or was not found in an
> external dll. A dummy subroutine was called in its place. Please link the
> TYPE or remove it from the input file  Reported information  : Not available
> *
>
> Could you give me some help please?
>
> Thank you,
>
> --
> Charlene
>
> EPMI- Groupe ECAM
> Université Pierre et Marie Curie
>
>
>
>
>
> --
> Davillé Charlène
>
> EPMI- Groupe ECAM
> Université Pierre et Marie Curie
> ------------------------------
>
> _______________________________________________
>
> TRNSYS-users mailing list
>
> TRNSYS-users at cae.wisc.edu
>
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110407/f42135d4/attachment-0005.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2780 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110407/f42135d4/attachment-0006.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ~WRD000.jpg
Type: image/jpeg
Size: 823 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110407/f42135d4/attachment-0007.jpg>

More information about the TRNSYS-users mailing list