[TRNSYS-users] (no subject)

[hamza aouissi]

hi everybody,

i have a little problem in simulating a combined cycle solar system, i'm trying to mix the air (by using the mixer of the STEC library type 330 ) from the central tower receiver and the hot gases from the gaz turbine and then send the mixture to the hot side of the superheater.The problem is i need to link the outlet flowrate and the outlet température of the mixer with tne inlet flowrate and température of the hot side of the superheater.In the mixer's outlets there isn't temperature there is flow rate and enthalpie.So how can i resolve this problem ?

Thanks in advance.

Hamza
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110421/c5a0a70d/attachment-0001.htm>