[TRNSYS-users] How to get kWh/m²a

[David BRADLEY]

Leo,
  there is no direct output for energy density. I would recommend 
integrating the building energy use during your simulation then 
multiplying it by the building area afterwards in your Excel sheet.
Best,
  David


On 4/8/2011 07:45, Leo Häberlein wrote:
> Hi Trnsys-Users,
>
> I know it might be an easy question, but i am pretty much a "rookie" 
> when it comes to trnsys.
> I just wanted to ask, if and how i can get the kWh/m²a output for my 
> building in an excel sheet or editor file??
> Thanks
>
> Leo
>
>
> _______________________________________________
> TRNSYS-users mailing list
> TRNSYS-users at cae.wisc.edu
> https://mailman.cae.wisc.edu/listinfo/trnsys-users

-- 
***************************
David BRADLEY
Principal
Thermal Energy Systems Specialists, LLC
22 North Carroll Street - suite 370
Madison, WI  53703 USA

P:+1.608.274.2577
F:+1.608.278.1475
d.bradley at tess-inc.com

http://www.tess-inc.com
http://www.trnsys.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20110411/f9c2108c/attachment-0001.htm>