[TRNSYS-users] digging into trnflow convergence problems

[frodriguezpc at labein.es]

It crashes even at n=7 timestep... I am pretty sure it has to do with this 
temparature thing. A check to my lst file shows this clear pattern with 
lack of convergence in al the external temperature peaks, so I turned off 
cooling and the result is I get convergence thanks to interior 
temperatures going above exterior at most of the previous conflict 
timesteps... still there are a couple times of year where I still get 
higher ext. temps, and convergence problems show

Francisco Rodríguez Pérez-Curiel

TECNALIA-Construcción
Parque Tecnológico, Edificio 700. E-48160 Derio (Bizkaia) (SPAIN)
Tel. +34 94 607 33 00,  Fax. +34 94 607 33 49
francisco.rodriguez at tecnalia.com,
www.tecnalia.com

**************** AVISO LEGAL  **************** DISCLAIMER 
******************
Este mensaje es personal y confidencial y su uso no autorizado está 
prohibido legalmente. Si usted no es el destinatario, proceda a borrarlo, 
sin reenviarlo ni conservarlo.
This message is personal and confidential, unauthorised use is legally 
prohibited. If you are not the intended recipient, delete it without 
resending or backing it.
**************************************************************************************



Mariëlle Nuchelmans <M.Nuchelmans at chri.nl> 
27/09/2010 09:18

Para
"frodriguezpc at labein.es" <frodriguezpc at labein.es>
cc
"trnsys-users at cae.wisc.edu" <trnsys-users at cae.wisc.edu>
Asunto
RE: [TRNSYS-users] digging into trnflow convergence problems






You could try even smaller time-steps, I’ve models with timestep: 0,03125 
(n=5), 0,015625 (n=6) and even 0.0078125 (n=7). It just takes a while 
before it’s finished calculating.
 
Kind regards,
 
Mariëlle 
 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100927/5f4eeecf/attachment-0005.htm>