[TRNSYS-users] Error from Type 15

[Fred Betz]

I received the following error that I have never seen before.

TRNSYS Message 427: An OUTPUT from the specified component model has been written to the global OUT array in a location beyond the allocated number of outputs from this model. Please check the component carefully to insure that INFO(6) is set correctly. The simulation has been aborted to avoid problems caused by over-writing the outputs from other component models.


Any thoughts on a cause and solution?

Fred


Fred Betz  PhD., LEED AP
Sustainable Systems Analyst



AEI | AFFILIATED ENGINEERS, INC.
5802 Research Park Blvd. | Madison, WI  53719

P: 608.236.1175 | F: 608.238.2614
fbetz at aeieng.com<mailto:fbetz at aeieng.com>  |  www.aeieng.com<http://www.aeieng.com/>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100922/82213f2a/attachment-0005.htm>