[TRNSYS-users] Wind parameter in Multizone building Type56

[Mariëlle Nuchelmans]

Wind velocity is a standard input if you use trnflow instead of trnsys. If you're using Trnsys instead of trnflow (for modelling ventilation) I don't quite understand what you mean with the effect on Heating Demand (or you mean that the convective heat transfer coefficient differs, than you can do this manually by using an equation and insert the result in the wall definition (H))

Kind regards,

Mariëlle

Van: Elias Sasati [mailto:elias.sasati at gmail.com]
Verzonden: woensdag 22 september 2010 14:10
Aan: trnsys-users at cae.wisc.edu
Onderwerp: [TRNSYS-users] Wind parameter in Multizone building Type56

Dear TRNSYS users,

When I am creating a multizone project with TRNSYS Studio guide, I don't see any connection of "Wind Velocity" parameter of Weather Data (Type 109)  with Multizone Building (Type 56).
Wind velocity and direction makes difference in the result of "Heating Demand Q".  I am asking this because I didn't find something similar in the manual, does TRNSYS calculates it in the end result without your permission ?


Thank you in advance,

Elias Sasati
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100922/bfe5fbc7/attachment-0005.htm>