[TRNSYS-users] Problem in make a link between data file and new

[Mehdi Shahrestani]

Dear Jeff Thornton

Many thanks for your swift reply.
Unfortunately, I did your recommended instruction but still the logic unit
is not highlighted.
As attached the "tmf" file is attached. 
I was wondering if you could give me your advice to tackle it.

Many thanks for your time
Regards
Mehdi


-----Original Message-----
From: Jeff Thornton [mailto:thornton at tess-inc.com] 
Sent: 10 September 2010 04:00
To: Mehdi Shahrestani; trnsys-users at cae.wisc.edu
Subject: Re: [TRNSYS-users] Problem in make a link between data file and
newcomponent

<The data file is linked into the new component and the response is
quite well. But, the problem is in performa, the line related to logic
unit (parameter for link data file and the component) is not highlighted
and is not getting number automatically. Where as in standard components
of Trnsys the logic unit line is highlighted and the number is
automatically assigned.>

When the proforma was created, the user did not associate the logical unit
parameter with the external file.  Open the proforma in edit mode, go to
the 'file' tab and choose the correct parameter in the 'parameter' drop
down box.  Save the proforma and then use the edit/replace feature in your
project to get the new version into your project.

Jeff


Jeff Thornton
President - TESS, LLC

22 North Carroll Street - Suite 370
Madison WI 53703 USA

Phone: 608-274-2577
Fax: 608-278-1475
E-mail: thornton at tess-inc.com
Web: www.tess-inc.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Type236.tmf
Type: application/octet-stream
Size: 1641 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/trnsys-users-onebuilding.org/attachments/20100910/8b322a29/attachment-0005.obj>